<bss>
<valid>0</valid>
<name>0</name>
<privacy>0</privacy>
<wlan>0</wlan>
<strength>0</strength>
</bss>
<scan>0</scan>
<ver>4615</ver>
<count>0</count>
<ssid>WifiRIBsBldg2</ssid>
(SSID name assigned to router)
</response>
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Other relay states: OFF, OVERRIDDEN ON, ON, BOUND ON, BOUND OFF
Other network command: ON
Other digital in state: OPEN
Other Universal Input 1 settings: 0-10V, 4-20mA, T2 Thermistor F, T2 Thermistor C
Universal Input 1 analog value (scaled by customer) followed by label (entered by customer)
Universal Input 1 DI status (analog range 0-5V must be selected and scale set to 0-5)
Other Universal Input 2 settings: 0-10V, 4-20mA, T2 Thermistor F, T2 Thermistor C
Universal Input 2 analog value (scaled by customer) followed by label (entered by customer)
Universal Input 2 DI status (analog range 0-5V must be selected and scale set to 0-5)
Other default power on states: ON, LASTSTATE
Other binding state: BOUND
User defined label
User defined label
Factory firmware version
<relayState>OVERRIDDEN OFF</relayState>
<lastCommand>OFF</lastCommand>
<digtalInputState>CLOSED</digtalInputState>
<ui1State>0-5V</ui1State>
<ui1Value>49.85 Percent</ui1Value>
<di1Value>Closed</di1Value>
<ui2State>0-5V</ui2State>
<ui2Value>49.85 Percent</ui2Value>
<di2Value>Closed</di2Value>
<powerOnState>OFF</powerOnState>
<bindingState>UNBOUND</bindingState>
<deviceHostName>Device Name</deviceHostName>
<deviceLocation>Device Location</deviceLocation>
<deviceVersion>v3.3.9 WIUI</deviceVersion>
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate
radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
To read status information:
http://192.168.100.10/status.xml
Response will be in the following format:
<?xml version=”1.0” encoding=”utf-8”?>
<response>
Functional Devices, Inc.
• p: 800.888.5538 • f: 765.883.7505 • www.functionaldevices.com • [email protected]
Router Information
