12
EN
SweatStop® DE20
Preparation
Connect the red and the black cables with the electrodes.
Now, plug the cables into the corresponding outlet socket located on the device: plug the red
cable into the red socket and the black cable into the black socket.
Change the polarity each time you start the therapy, unless otherwise recommended by your
doctor. The pole reversal can be carried out by plugging the red cable into the black socket and
the black cable into the red socket.
Treatment of the hands and / or feet
Place the tubs on a firm, level surface. For the treatment of the hands, place both trays side by side
on a table; for the treatment of the feet, place both trays side by side on the floor. If you treat
hands and feet simultaneously*, position one tray on the table and one on the floor.
* Since the conductivity of hands and feet varies, this is only recommended for experienced users.
The electrodes must never directly touch the skin. Otherwise you will risk burns! Please pour
a small amount of tap water (hand treatment: ~ 0.5 l, foot treatment: ~ 0.75 l) into each tub.
The water temperature should be according to your personal comfort and has no effect on the
therapy. The water should cover only the body parts affected by the hyperhidrosis – not the whole
hand or the whole foot.
