FUNAI TVCR-2104, Руководство по обслуживанию

Страница: 78 / 93

2-4-1 Z13PDA
DISASSEMBLY/ASSEMBLY PROCEDURES
OF DECK MECHANISM
Before following the procedures described below, be sure to remove the deck assembly from the cabinet. (Refer to
CABINET DISASSEMBLY INSTRUCTIONS on page 1-5-1 of Main Section.)
All the following procedures, including those for adjustment and replacement of parts, should be done in Eject
mode; see the positions of [41] and [42] in Fig. DM1 on page 2-4-3. When reassembling, follow the steps in reverse
order.
STEP
/LOC.
No.
START-
ING
No.
PART
REMOVAL INSTALLATION
Fig. No.
REMOVE/*UNHOOK/
UNLOCK/RELEASE/
UNPLUG/DESOLDER
ADJUSTMENT
CONDITION
[1] [1] Guide Holder A T DM3 2(S-1)
[2] [1]
Cassette Holder
Assembly
T DM4 (S-10)
[3] [2] Slider (SP) T DM5 (S-1A), *(L-1)
[4] [2] Slider (TU) T DM5 *(L-2)
[5] [4] Lock Lever T DM5 *(L-3), *(P-1)
[6] [2] Cassette Plate T DM5
[7] [7] Cylinder Assembly T DM1, DM6 Desolder, 3(S-2)
[8] [8] Loading Motor Assembly T DM1, DM7
Desolder, LDG Belt,
2(S-3)
[9] [9] ACE Head Assembly T DM1, DM7 (S-4)
[10] [2]
Tape Guide Arm
Assembly
T DM1, DM8-1 *(P-2)
[11] [10] C Door Opener T DM1, DM8-1 (S-4A), *(L-4)
[12] [11] Pinch Arm (B) T
DM1, DM8-1,
DM8-2
*(P-3)
[13] [12] Pinch Arm (A) Assembly T
DM1, DM8-1,
DM8-2
[14] [14] FE Head T DM1, DM9 (S-5)
[15] [15] Prism T DM1, DM9 (S-6)
[16] [2],[15] Sensor Gear T DM1, DM9
[17] [2] Slider Shaft T DM10 *(L-5)
[18] [17] C Drive Lever (SP) T DM10
[19] [17] C Drive Lever (TU) T DM10 (S-7), *(P-4)
[20]
[7],[8],
[10]
Capstan Motor B DM2, DM11 3(S-8), Cap Belt
[21] [21] Clutch Assembly B DM2, DM12 (C-1)
[22] [22] Cam Holder Assembly B DM2, DM12 *(L-6)
[23] [23] Cam Gear (B) B DM2, DM12 (C-2), *(P-5)
[24] [24] Mode Gear B DM2, DM13-1 (C-3)
[25]
[21],[23],
[24]
Mode Lever B
DM2, DM13-1,
DM13-2
(C-4), *(L-8)
[26] [22] Worm Holder B DM2, DM13-1 (S-9), *(L-9), *(L-10)
[27] [26] Pulley Assembly B DM2, DM13-1
[28] [25],[26] Cam Gear (A) B
DM2, DM13-1,
DM13-2
[29] [25] Idler Gear B DM1, DM14
[30] [29] Idler Arm B DM1, DM14 *(L-11)
[31] [25] BT Arm B DM2, DM14 *(P-6)