FUNAI PB1-M200, Руководство пользователя

Страница: 54 / 64

54 EN
Proxy Setting
1
Follow steps 1 to 4 in “Connection
Test” on page 51.
2
Use [
K
/
L
] to select “Custom”, then
press [OK].
3
Use [
K
/
L
] to select “Proxy Setting”,
then press [OK] repeatedly to select
the desired setting.
• For default settings, select “Do Not Use”.
• If you need to change the proxy setting
as instructed by your Internet service
provider to set the designated proxy
address and port, select “Use”.
If you select “Use”, follow the
instructions below to set the proxy
address and proxy port.
3-a) Use [
K
/
L
] to select “Proxy
Address”, then press [OK] . Proxy
address setting screen will appear.
Enter proxy address.
• The keyboard screen will appear.
[
K
/
L
/
0
/
1
]
: Move the highlight.
[the Number
buttons]
: Enter number.
[OK] : Enter the highlighted
item.
[CLEAR] : Clear the entered
number or word.
3-b) After you enter proxy address
correctly, press [BLUE] .
• Confirmation message will
appear. Select “Yes” to complete
the settings.
3-c) Use [
K
/
L
] to select “Proxy Port” ,
then press [OK] . Proxy port setting
screen will appear. Enter proxy port
number with number buttons.
3-d) After you enter proxy port correctly,
press [OK] .
4
Press [RETURN] to go back to the
previous screen, or press [SETUP] to
exit.
Note
• The range of input numbers for the port
number is between 0 and 65535. (If you
enter a number larger than 65535, it
will be regarded as 65535.)
• For proxy port, certain ports might be
closed, blocked or unusable depending
on your network environment.
Connection Speed
You can set connection speed as your
preference. (The default setting is “Auto”.)
1
Follow steps 1 to 4 in “Connection
Test” on page 51.
2
Use [
K
/
L
] to select “Custom”, then
press [OK].
3
Use [
K
/
L
] to select “Connection
Speed”, then press [OK].
4
Use [
K
/
L
] to select the desired
setting, then press [OK].
“Auto”:
Set the appropriate connection speed
automatically, in accordance with your
network environment.
“10BASE Half”:
Set the connection speed to “10BASE
Half”.
“10BASE Full”:
Set the connection speed to “10BASE Full”.
“100BASE Half”:
Set the connection speed to “100BASE
Half”.
“100BASE Full”:
Set the connection speed to “100BASE
Full”.
5
Press [RETURN] to go back to the
previous screen, or press [SETUP] to
exit.
Note
• Choose a connection speed in
accordance with your network
environment.
• The network connection may be
disabled depending on the device,
when the settings are changed.