FUNAI PB1-M200, Руководство пользователя

Страница: 53 / 64

53 EN
IP Address Setting / DNS Setting
1
Follow steps 1 to 4 in “Connection
Test” on page 51.
2
Use [
K
/
L
] to select “Custom”, then
press [OK].
3
Use [
K
/
L
] to select “IP Address
Setting”, then press [OK] repeatedly
to select the desired setting.
“Auto(DHCP)” : If your router has DHCP
server function, select
“Auto(DHCP)”.
“Manual” : If your router does not
have DHCP server
function, select “Manual”.
If you select “Manual”, follow the
instructions below to set the IP address
and DNS.
3-a) Use [
K
/
L
] to select “IP Address”,
“Subnet Mask” or “Default Gateway”,
then press
[OK] . IP address setting
screen will appear. Enter IP address,
subnet mask or default gateway
with cursor buttons and number
buttons.
• Enter the IP address number after
checking the specifications of
your router.
• If the IP address is unknown,
check the IP address of other
devices. (e.g. PC connected via
LAN cable) and assign a different
number from those of other
devices.
3-b) After you enter all correctly, press
[OK] .
• Confirmation message will
appear. Select “Yes” to complete
the settings.
3-c) Use [
K
/
L
] to select “Primary DNS”
or “Secondary DNS”, then press
[OK] . DNS setting screen will
appear. Enter primary DNS or
secondary DNS with cursor buttons
and number buttons.
• Enter the DNS addresses provided
by your Internet provider.
• If the DNS address is unknown,
check the DNS address of other
devices (e.g. PC connected via
LAN cable) and assign the same
DNS address.
3-d) After you enter all correctly, press
[OK] .
• Confirmation message will
appear. Select “Yes” to complete
the settings.
4
Press [RETURN] to go back to the
previous screen, or press [SETUP] to
exit.
Note
• The range of input numbers is between
0 and 255.
• If you enter a number larger than 255,
the number will automatically be 255.
• The manually entered addresses will be
saved even if you change the setting to
“Auto(DHCP)”.
• When you enter a wrong number, press
[CLEAR] to cancel. (The number will be
back to “0”.)
• If you want to enter 1 or 2 digit number
in one cell, press [
1
] to move on to the
next cell.
• If the entered IP address or the default
gateway or primary DNS address are
the same as the default setting, IP
address setting will be set to
“Auto(DHCP)”. (The manually entered
number will be saved.)
• When IP address setting is set to
“Manual”, the setting of DNS setting will
automatically be “Manual” and when IP
address setting is set to “Auto(DHCP)”,
you can set either “Auto(DHCP)” or
“Manual” for DNS setting.