30
EN
30
EN
TIMER RECORDING
Checking, canceling, or correcting the timer
programming information
If the timer program did not complete correctly,
the error number appears in the timer pro-
gramming list.
1) Press [TIMER SET].
will disappear on the front panel display.
2) Press [TIMER].
3) Check the information on the list you will need.
Timer Programming
1/1
TUE JAN/01 11:00AM
SP (1:00)
JAN/ 2/08 12:00 AM E1 SP
Date
Start
End
E1/E2
JAN/02 12:00AM 1:00AM
E1
New
Program
4-A) To delete the timer program:
1 Use [
K
/
L
] to select the program you want to
delete, then press [OK].
2 Use [
K
/
L
] to select “Delete”, then press [OK].
Confirmation window will appear.
3 Use [
K
/
L
] to select “Yes”, then press [OK].
4-B) To correct the timer program:
1 Use [
K
/
L
] to select the program you want to
correct, then press [OK].
2 Use [
K
/
L
] to select “Program Change”, then
press [OK].
3 Correct the timer program by using
[
K
/
L
/
{
/
B
], then press [OK].
5) Press [TIMER] to exit.
6) Press [TIMER SET] to return to the timer standby
mode.
Note
• Press
[TIMER]
to check the timer recording in progress.
When the timer recording is proceeding, that
program will be highlighted with red. In this case,
you cannot select any other program.
Timer Programming
1/1
WED JAN/02 11:00AM
Date
Start
End
E1/E2
E41
JAN/02
12:00AM 1:00AM
E1
New
Program
Each error number means:
E1-22
E37-39
Recording error other
than below
E41
Power failed
E24
Unrecordable disc
E42
No disc when
recording
E25-26 Copy prohibited
program
E43
Already 49 titles
recorded
E29
Disc protected
E44
Already 254 chapters
recorded
E30
Disc full
E45
Copy prohibited
program
E35
PCA full *1
E46
It is impossible to
record additionally
on a disc recorded
by other units
when setting “
Make Recording
Compatible” to “OFF”.
E36
Already finalized
video format disc
E40
Some portion has
not been recorded
because of program
overlapping.
Recording did not
start at the starting
time.
• E23, E27, E28, E31, E32, E33 and E34 are not displayed.
• A program with the error number is grayed in the timer
programming list.
• Once the timer programming list with error line(s) is
displayed, or after canceling and setting again the timer
standby mode, the program line(s) with error will be
cleared.
*1 PCA is a disc's space reserved for recording test.
Press [STOP
C
]
on the front panel
to stop the disc
recording.
Press [STOP
C
/EJECT
A
]
on the front panel
to stop the
cassette tape recording.
[STOP
C
] on the remote control is not effective.
To stop the timer recording in progress
E9E8BUD_ZV427MG9.indd 30
E9E8BUD_ZV427MG9.indd 30
2008/03/27 13:31:46
2008/03/27 13:31:46
