FUNAI LT850-M26 - SERVICE, Руководство по обслуживанию

Страница: 12 / 72

4-1 A0CA0DC
CABINET DISASSEMBLY INSTRUCTIONS
1. Disassembly Flowchart
This flowchart indicates the disassembly steps for the
cabinet parts, and the CBA in order to gain access to
item(s) to be serviced. When reassembling, follow the
steps in reverse order. Bend, route and dress the
cables as they were.
2. Disassembly Method
Note:
(1) Order of steps in procedure. When reassembling,
follow the steps in reverse order. These numbers
are also used as the Identification (location) No. of
parts in figures.
(2) Parts to be removed or installed.
(3) Fig. No. showing procedure of part location
(4) Identification of parts to be removed, unhooked,
unlocked, released, unplugged, unclamped, or
desoldered.
N = Nut, L = Locking Tab, S = Screw,
H = Hex Screw, CN = Connector
* = Unhook, Unlock, Release, Unplug, or Desolder
e.g. 2(S-2) = two Screws (S-2),
2(L-2) = two Locking Tabs (L-2)
(5) Refer to the following "Reference Notes in the
Table."
Step/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Unclamp/
Desolder
Note
[1]
Stand
Assembly
D1 4(S-1) ---
[2]
Rear
Cabinet
D1 11(S-2), 2(S-3), (S-4) ---
[3]
Inverter
CBA D2
D3
6(S-5), *CN407,
*CN1201, *CN1202,
*CN1203
---
[4]
Tuner
Shield
D2 2(S-6) ---
[5]
Power
Supply
CBA
D2
D3
7(S-7), *CN601,
*CN101, *CN202,
*CN401, *CN402,
*CN403, *CN404,
*CN406, *CN801,
*CN802
---
[6] Jack Holder D2 2(S-8) ---
[7]
Digital Main
CBA Unit D2
D3
9(S-9), 2(S-10),
2(H-1), *CN3901,
Shield Box
---
[8]
Jack Holder
(HP-SW)
D2 (S-11) ---
[9]
Power SW
CBA D2
D3
4(S-12) ---
[1] Stand
Assembly
[2] Rear Cabinet
[6] Jack Holder
[5] Power Supply
CBA
[13] Speaker
[9] Power SW
CBA
[4] Tuner Shield
[7] Digital Main
CBA Unit
[14] Function
CBA
[12] LCD Module
Assembly
[11] Stand
Holder
[15] Front
Cabinet
[3] Inverter CBA
[8] Jack Holder
(HP-SW)
[10] Switch
Holder
[10]
Switch
Holder
D2
3(S-13), Separation
Sheet(S)
---
[11]
Stand
Holder
D2 2(S-14), 2(S-15) ---
[12]
LCD
Module
Assembly
D2
D3
Separation Sheet(P) ---
[13] Speaker D2
8(S-16), Speaker
Holder(L),(R)
---
[14]
Function
CBA D2
D3
3(S-17) ---
[15]
Front
Cabinet
D2 --------------- ---
↓
(1)
↓
(2)
↓
(3)
↓
(4)
↓
(5)
Step/
Loc.
No.
Part
Removal
Fig.
No.
Remove/*Unhook/
Unlock/Release/
Unplug/Unclamp/
Desolder
Note