Remi
handset
Setup
Custom settings
Troubleshooting
Reset procedure
Contact
1
1
2
5
5
5
Remi
handset
LED Display
Up/Down
Presets
M Buttom
1
Setup
Initial calibration
Before you start using your desk normally, you’ll need to get all the parts synced. Don’t worry — it’s easy.
With Memory Preset Handset
1.
Press and hold the DOWN button until the display reads RST. Release.
2.
Press and hold the DOWN button again, this time until the desk first lowers slightly, then rises slightly, and
finally stops. Release the DOWN button.
3.
You can now use your desk. See page 2 for tips on making the most of your Memory Preset Handset.
Setting memory presets
1.
Adjust the desk to the desired height.
2.
Press M (the display will show S -).
3.
Press a number 1 – 4.
4.
Pressing that number will return your desk to the programmed height. By default, the desk will continue to
move on its own once you’ve activated the preset, though pressing any other button will stop this move-
ment. If you prefer to change this behavior, please refer to “Toggle between One Touch and Constant Touch
Presets” on page 4.
