J. Specifications
Model
FUM
– 2205
CBP FUM
– 2207
CBP FUM
- 2210
CBP
Output
Absorption Charge Voltage Selections
AGM/GEL : 28.4V WET : 29.4V CALCIUM-CALCIUM : 32.5V
Float Charge Voltage Selections
26.4V
27.0V
27.6V
Battery Charger / Power Supply Selections
Yes
Yes
Yes
Maximum Output Charging Current (Continuous)
5A
7.5A
10A
Recommended Battery Capacity Range
20 – 50AH
30 – 80AH
40 - 100AH
Soft Start Bulk Charge
Battery Voltage to Trigger (cut-in) Soft Start
Bulk Charge Mode
<20.5V
Soft Start Bulk Charge Current (Current Limit)
2.5A
3.8A
5A
Line Regulation (180-260V) for Charging Current
<0.6%
Ripple and Noise (Peak to Peak)
100mV
100mV
150mV
Efficiency at Maximum Power
90%
87%
82%
Dual Bank Charging (Battery must be of same type)
No
Yes
Yes
Input
AC Voltage Range
180 – 260V 50Hz~
AC Current at Full Load
1.2A 1.8A
2.4
A
Protection
Overload
90-110% Rated Output Current or 50% Rated Output Current (Soft
Charge)
Protection Type : Constant Current Limiting, recovers Automatically after
Fault Condition is Removed.
Short Circuit
Recovers Automatically After Fault Condition is Removed
Reverse Polarity
Car Blade Fuse
Over Temperature
Protection Type:Automatically de-rate Charge Current Until Zero or Shut
Down
OVP Output Over Voltage
Yes
Cooling
Cooling Method
Convection Cool
Thermostatic, Variable Speed Fan, Fan stops at
Float
Indicators
3 Stage Battery Charger / Power Supply Mode
Yes
Charge Phase Bulk / Absorption / Float
Yes
Fault Mode
Yes
AC Power
Yes
Fuses
AC Fuses at IEC AC Power Socket
T2A
T3.15A
T5A
DC Car Blade Fuse at Front Panel
10A
15A
20A
Accessories
Cable & Spare Fuses
Yes
Remote Temperature Sensor
Optional
Approvals
Safety : EN 60335
Yes
EMC : EN 55014
Yes
Others
Dimensions and Weight
160x61x173mm ; 1.3kg 160x61x173mm ; 1.4kg 160x61x207mm ; 1.6kg
Remarks
All values are based on the standard ambient temperature 25°C and pressure 0.1Mpa.
Rev. 1.0 11/2006
7673-2210-0000