background image

 

 

To activate the Image Detail Enhancement (IDE)

 short-

press the GAIN switch three times and letters 

IDE

 will appear in 

the display 

– you can now rotate the same switch and image 

details will be enhanced.  There are 7 levels of enhancement and 
a Zero level.  Each IDE level incrementally increases the level of 
the detail, similar to the TV resolution upscaling, allowing user to 
greatly enhance the image resolution and level of image detail.  
This feature is especially useful during high humidity, where 
normally level of image detail is poor.  It is also useful when 
observing object at long distances and when utilizing Zoom 
function. 

 

DEVICE MENU

 

NAVIGATION 

– IMPORTANT!

 

1.  When long-pressed, the Super 

Controller activates the main menu 
(

M

).   

2.  On Once Menu is activated, rotating 

controller will highlight each menu 
chapter from top to bottom. 

3.  Once the particular menu chapter is 

highlighted in green color, the 
selection can be initiated by short-
pressing the Super Controller, after which the menu chapter 
will highlight in red color. Now rotate the Super Controller in 
either direction to select desired setting. Confirm the setting by 
short-pressing the Super Controller, which will change the 
highlight from red back to green color. Now the chapter is out 
of the selection mode and next menu chapter can be selected 
by rotating the Super Controller. 

4.  Exit back to the main menu by either short-pressing or long-

pressing the Super Controller (depends on the menu function) 

5.  Main menu can then be turned off by long-pressing the Super 

Controller again, or, alternatively the menu automatically turns 
off after 15 seconds of inactivity. 

 

Main Menu Selections (from top to bottom): 

1.  User Profile 

There are 3 Custom User Profiles, which can be saved and 
deployed when necessary. Each user profile covers variety of 
settings, such as Color Palette, type of reticle, color of reticle, 
sensor gain and sensitivity, display brightness, Image Detail 
Enhancement and other settings. We recommend finding best 
settings for a particular terrain or weather conditions and then 
saving it as a User Profile, so that next time you are in a 
same/similar terrain or weather pattern, you can quickly 
activate the settings without having to adjust them all 
individually. There are 3 customized User Profiles and 3 

Содержание O-40

















Отзывы: