7.1 -
Wi-Fi :
Wi-Fi converters (
TCP-485 Wi-Fi
and
TCP-485 Wi-Fi Log
) can be accessed through the
inbox
in two ways:
-
Hotspot on
: Converters can be configured to connect to the Wi-Fi network provided by the
inbox
(without a Wi-Fi router).
Sitrad
-
Hotspot off
: Converters are configured to connect to an existing Wi-Fi network (with a Wi--Fi router), and the
inbox
accesses these
Sit
converters through the same Wi-Fi network
7.2 - USB
: Connect the USB cable to the
inbox
appropriate input. The other end of the cable should be connected to the
CONV32
. It can be
sitrad
directly connected to up to four USB converters in the
inbox
, using the
CONV32
version 03 or higher. If version 01 or 02of
CONV32
is
used only one USB can be connected.
7.3 - Ethernet
: Connect the
inbox
to the router using an Ethernet cable (RJ-45). With another cable (RJ-45), connect the
TCP-485
Sitrad
(Ethernet converter) to the same router.
7.4 - RS-485
: Directly connect the first terminal block to inputs A and B of
inbox
, maintaining the ‘’A-A, B-B’’ connection pattern. One
Sitrad
terminal block must be used for each connected controller.
MT-530
MT-530
super
super
MT-530
MT-530
super
super
A
A
A
A
B
B
B
B
A
A
B
B
A
A
A
A
B
B
B
B
A
A
B
B
MT-530
super
MT-530
super
A
A
B
B
A B
A
A
B
B
A B
MT-530
super
MT-530
super
A
A
B
B
A B
A
A
B
B
A B
27
MT-530
super
A
A
B
B
A B
Hotspot on (without a Wi-Fi router)
Hotspot off (with a Wi-Fi router)
MT-530
super
A
A
B
B
A B
x
IMPORTANT: Hotspot is the operation mode in which
inbox
provides other devices with a Wi-Fi network infrastructure to connect to.
Sitrad
!