To start/stop a manual defrost, regardless of programming, press key 1 for 8 seconds until the message
[dF]
[On]
[Of]
appe
, then release The message
will be shown when it starts, and
when it is stopped.
ars
it.
release the
key
release the
key
To check which process step is being performed, press key “3" for 4 seconds until the
message
[St]
appears, then release it. The current process step is displayed followed by the desired operating
temperature (setpoint) relative to the operating mode (normal/power save).
release the
key
release the
key
Preset 1
Preset 2
Preset 3
Preset 4
WARNING
ACSESSORIES:
Use original Full Gauge Controls accessories only.
If you have any questions, please contact technical support.
AUTHORIZED SERVICE:
Product installation or maintenance may only be performed by qualified professionals;
BEFORE INSTALLING THE CONTROLLER, WE RECOMMEND THAT YOU READ THE ENTIRE
INSTRUCTION MANUAL IN ORDER TO AVOID POSSIBLE DAMAGE TO THE PRODUCT.
PRECAUTIONS WHEN INSTALLING THE PRODUCT:
Before performing any procedure on this instrument, disconnect it from the power source;
Make sure that the instrument has adequate ventilation, avoiding installation on panels containing
devices that may cause it to operate outside the specified temperature range;
Install the product away from sources that may generate electromagnetic disturbances, such as: motors,
contactor, relays, solenoid valves, etc;
AS IT CONSTANTLY EVOLVING, FULL GAUGE CONTROLS RESERVES THE RIGHT TO CHANGE THE
INFORMATION CONTAINED IN THE MANUALAT ANY TIME, WITHOUT PRIOR NOTICE.
1. DESCRIPTION
5. BASIC OPERATIONS
2. AP LICA
P
TIONS
3. TECHNICAL SPECIFICATIONS
4. INDICATIONS AND KEYS
D-Ceor
T-Copre
and
are electronic controllers for refrigeration dedicated to freezers, beverage displays
and refrigerated cabinets. These controllers can activate cooling, defrost, fan and lighting systems. In
addition, it allows to pre-define up to 4 operating temperatures that are easily changed by its touch-sensitive
keyboard (touchpad) for freezers with rotation of different products.
The controller supports 2 temperature sensors for the control of the refrigerated environment and intelligent
defrost control (start and end of defrost by time or temperature). For a better use for energy, it can control
ventilation during the cycle of the compressor and use Smooth Defrost, a defrosting technique that reduces
the final temperature of the electrical resistance and the amount of heat emitted.
Using its digital input, door opening can be monitored and economic setpoint, defrost or Fast Freezing can
be activated. The Fast Freezing function is an alternative for speed up the cooling process, recommended
for use after the process of replacing products in the freezer.
In addition
controller has system voltage monitoring where the operation of the equipment can be
,
T-Core
limited to only a safe voltage range, reducing the chance of electrical damage due to the power supply.
- Beverage displays;
- Refrigerated display cabinets.
Control temperature
-50 60°C (-58 99°F)
to
to
Operating temperature
0 °C (32 °F)
to 60
to 140
0.1°C
-9.9 and 9.9°C 1°C
between
and
in the
remainder of the range. 1°F across the range
Controller supply
85~240Vac (50/60Hz)
Resolution
10 90% UR ( thout condensation)
to
wi
100 x 54 x 22mm (3,9 x 2,1 x 0,8")
91 x 45mm ( x ")
3,6 1,7
116 x 88 x 27mm (4,6 x 3,5 x 1,1")
Digital input
Operating humidity
Front dimension (with frame)
Front cutout dimension
Base module dimension
Configurable dry contact type
Maximum relay current
COMP: 10(8)A / 250Vac 1HP - compressor output
DEFR: 7A / 250Vac - defrost output
FAN: 3(2)A / 250Vac - 1/10HP - fan output
LIGHT: 2(2)A / 250Vac - lamp output
5.1 Change the preset
5.2 Turn the economy mode on / off
5.3 Disable the alarm
5.4 Manual defrost
5.5 View process step and current desired temperature (setpoint)
To select the desired
, press the corresponding key for seconds until the
preset
4
message
appears,
[Pr]
then release it.
To
key for seconds until the
message appears hen
turn power save mode on / off, press the
ECO
8
, t
[EC]
release it.
To disable the audible alarm, quickly press any of keys 1 , 2, 3 or 4.
Have this manual in the palm of your
hand using the
application.
FG Finder
DTCOREV01-01T
-19151
Turn off
control functions
Function
lock
Serial
programming
Manual
defrost
Sound
alarm
Touch
screen
Power
save mode
DIGITAL REFRIGERATION CONTROLLER WITH
TOUCH-SENSITIVE KEYS
Ve
r.
02
On
Off
On
Off
Displays the current desired
temperature (setpoint)
Current
step
Fan delay
Refrigeration
Pr -defrost
e
Defrost
Drainage
Fast Freezing
ex: (2.0ºC)
press for
se
4
conds
press for
s
8 econds
press or
f
8 seconds
press or
f
4 seconds
Ve
r.
02
10 - LED temperature unit indication
5 - LED lamp indication
6 - LED fan indication
1 - Increase key
7 - LED pre-defrost,
defrost or drainage
indication
2 - SET key
4 - Power save mode key
9 - LED power
save mode indication
3 - Decrease key
8 - LED compressor
indication
Compressor delay
dl
