Full Boar FBWDV-40PTU, Инструкция по эксплуатации

Страница: 5 / 11

8 9
ASSEMBLY WET & DRY VACUUM SAFETY WARNINGS (cont.)
• This appliance is not intended for use by persons (including children) with reduced
physical, sensory or mental capabilities, or lack of experience and knowledge,
unless they have been given supervision or instruction concerning use of the appliance
by a person responsible for their safety.
• Children should be supervised to ensure that they do not play with the appliance.
• The equipment is to be used only for its prescribed purpose.
Any other use is
deemed to be a case of misuse. The user / operator and not the manufacturer will be
liable for any damage or injuries caused as a result of this.
Fitting the wheels (9):
1.
Place an R-clip (29) for fitting the wheels through the appropriate hole in the axle (32),
(fig. 1).
2.
First fit a washer (30) and a wheel (9), then another washer (30) to the axle (32), (fig. 2).
3.
Now slide the axle (32) through the guides provided for it on the underside of the tank
(8), (fig. 3).
4.
Fit a washer (30) and second wheel (9) to the empty end of
the axle (32), and secure it with the remaining washer (30)
and the R-clip (29).
5. Push the covers (28) on to the outside of the wheels (9) so
that the hooks on the covers (28) clip into the slots in the
wheel (9), (fig. 4).
Fitting the castors (11):
1.
Fit the castors (11) into the appropriate mountings on
the underside of the tank (8). Push the castors (11) firmly
into the mounting until they engage with a clicking noise,
(fig. 5).
Fitting the main handle (1):
1.
Place the main handle (1) onto handle mounts. Secure in
place with bolts (31) and cable hooks (5), (fig. 6).
Fig. 1 Fig. 2
WARNING!
During assembly ensure the wet and dry vac is switched OFF and
disconnected from the power supply.
Fig. 5
Fig. 6
Fig. 4
Fig. 3