Full Boar FBT-6000, Инструкция по эксплуатации

Страница: 14 / 18

14
MAINTENANCE
• Keep air vents clean of dust and dirt.
• We recommend that you clean the device after each time you have finished using it.
• Empty dust and dirt from the debris bags regularly.
• Remove dust and dirt from the dust extractor housing and motor housing regularly with
a soft cloth, brush or compressed air.
• If the power cord is damaged, have it replaced by an electrician or a power tool repairer.
• Regularly check that all bolts, screws and nuts are securely fixed as these could work
loose during normal operation.
Note:
Ozito Industries will not be responsible for any damage or injuries caused by the
repair of the drill press by an unauthorised person or by mishandling of the pedestal drill.
WArNINg! Ensure the dust extractor is switched off and disconnected from the
power supply before performing any maintenance or cleaning.