Full Boar FBT-3300, Инструкция по эксплуатации

Страница: 12 / 34

12
Connecting the battery
The Full Boar FBT-3300 contains a battery to power the starter
motor and remote start function. In the case of a flat battery,
the generator can still be started with the recoil starter.
Note:
The battery is shipped fully charged from the factory. To
minimize self-discharge, the leads are shipped disconnected
from the battery.
If the generator is new and has never been used before, you
will need to connect the negative “-” wire to the battery as
follows:
1.
Loosen the 2 cover screws and remove the left side
maintenance cover (6) (Fig. 1).
2.
Connect the black “-” wire terminal onto the “-” battery terminal (Fig. 2) by tightening the
bolt.
3.
Check that the red “+” wire has already been fitted to the “+” battery terminal.
4.
Re check the insulation covers on the black and red wires are completely covering their
corresponding terminals.
Fuse
Note:
The in-line fuse protects the electric starting circuit. If
this fuse is blown, or the battery isn’t present, the generator
can still be used with the pull start method.
The fuse is connected to the positive (red) wire. if the fuse
cannot be located, remove the wire from the positive terminal
and pull it towards yourself to expose the fuse.
SET-UP
Fig. 1
Fig. 3
Fuse
Fig. 2