10
1.
Ensure your workpiece is securely clamped where possible.
2.
Connect the tool to the mains power supply. The ready for
use indicator LED will illuminate when the tool is connected
to power and ready for use (Fig. 5).
3.
Select the desired mode of operation (refer to Choosing an
Operation Mode section of manual).
4.
Hold the rotary hammer drill to the work surface. Apply
enough pressure on the rear handle so that the press control
indicator on the side of the housing goes green (Fig. 6). The
rotary hammer drill will work most efficiently in this position.
If you apply excessive pressure the indictor will go red. This
guide prevents overloading of the tool.
5.
Squeeze the on/off trigger to start drilling (Fig. 7). Release
the trigger to stop drilling.
NOTE:
Prior to changing modes, the on/off switch should be
released and the drill should have come to a complete stop.
OPERATION
Fig. 5
Fig. 6
Fig. 7
Содержание FBT-0700
Страница 15: ...15...
