12
ASSEMBLY (cont.)
Discharge Chute
Parts required: Discharge chute (15) and T- bolt x 2 (20)
1.
Place the discharge chute (15) in position
on the rear of the base frame (9) and slide
it across so that the pins of the frame
engage the hinges on the discharge chute
(15), (fig. 11).
2.
Slide the mounting bracket on the
underside of the discharge chute (15) so
that the two holes align with those in the
frame (fig. 12).
3.
Secure in place using two T-bolts and
washers (20). Firmly tighten by hand
turning clockwise (fig. 13).
Fig. 11
Fig. 12
Fig. 13
IMPORTANT!
Ensure the hopper (4) and discharge chute (15) are fitted and secured
with T-bolts (20) otherwise the safety interlock will prevent the motor from starting.
