9
WARNING!
During assembly ensure the concrete grinder is switched OFF
and disconnected from the power supply.
Front handle (3)
The front handle (3) can be fitted to either side of the
gear housing using one of the handles mounts (7)
1.
Align the front handle (3) to the selected handle
mount (7). (fig. 1).
2.
Now tighten the wing nut to secure the handle in
place (fig. 2).
Safety guard (9)
The safety guard must be used at all times whilst
operating the concrete grinder.
1.
Release the guard lever (8) and place safety guard
on spindle neck (fig. 3).
2.
If the safety guard will not fit over the spindle neck,
loosen the guard nut with the spanner (11) and
rotate the safety
guard slightly left
and right to aid
fitment (fig. 4).
3.
Close the guard
lever to lock the
safety guard in
position (fig. 5).
Fig. 1
Guard Nut
Guard Nut
Guard Nut
WARNING!
When the guard nut is over tightened the guard lever (8) will
not be able to close properly. If the guard nut is too loose the guard lever
will close but will not securely fasten the safety guard (9) to the spindle
neck.
Fig. 2
Fig. 3
Fig. 4
Fig. 5
ASSEMBLY
