NiCd
19)
The Driver is intended for ordinary locations and for permanent installation into one or more Listed
emergency luminaires.
20)
For use with a metal enclosed wiring system.
21)
FIXTURE
The FHSCP-UNV can be used with most LED loads that operate at 10-55 VDC. See the FHSCP-
UNV Model Specification Chart for output specifications of the unit being installed.
A)
The FHSCP-UNV series has been evaluated to and found compliant to UL standard
924. The as-installed performance of system must meet or exceed all Federal, State,
and Local code requirements.
B)
Refer to Addendum 11152019 for detailed specifications and methods to calculate emergency light
levels.
FHSCP-UNV MODEL SPECIFICATION CHART
MODEL #
OUTPUT POWER (CONSTANT)
FHSCP-UNV-5WL
5.0 WATTS
FHSCP-UNV-7.8WL
7.8 WATTS
FHSCP-UNV-10.7WL
10.7 WATTS
FHSCP-UNV-13.7WL
13.7 WATTS
FHSCP-UNV-17WL
17.0 WATTS
SAVE THESE IMPORTANT SAFETY INSTRUCTIONS
The installation and use of this product must comply with all national, federal, state,
municipal, or local codes that apply. Please read this manual thoroughly before installing or
operating FHSCP-UNV Emergency LED Drivers.
2020 REV D2
Fulham extends a limited warranty only to the original purchaser or to the first user for a period of 5 years from the date of manufacture when properly installed
and operated under normal conditions of use. For complete terms and conditions, please reference the Fulham Product Catalog (www.fulham.com).
Due to a program of continuous improvement, Fulham reserves the right to make modifications or variations in design or construction to the
equipment described. © Fulham Company Limited, All Rights Reserved.
Page 2 of 8
18)
Use with grounded, UL Listed, damp location rated fixtures and case should be grounding.
17)
The FHSCP-UNV contains a non-replaceable NiCd battery that must be recycled properly
