ENGLISH
Use & Care Manual
13
Setting the Clock and Timer
The time of day is displayed in hours and minutes.
Always set the clock immediately after installation or after a power failure. Once power returns to the oven, the
clock displays the time 12:00
AM
.
The clock time will appear during all oven operations except when there is the timer or any timed cooking
operations running.
The oven is preset to a 12-hour clock and indicates
AM
and
PM
.
To Set the Time of Day
1. Touch [TIME] until the display show
s
the
“SET
TIME”
writing.
2. Touch [INC] or [DEC] to set the desired time, the
hours will begin flashing: continue until the correct
hour value and
AM
or
PM
indication is selected.
3. Touch [TIME] again to confirm the hour and minutes
will start flashing.
4. Touch [INC] or [DEC] to set the desired minutes
value or hold the key to change by 10 minute steps.
5. Touch [TIME] again or wait for 5 seconds in order to
confirm the time.
NOTE: The Time of Day can never be set if any time
function is already set: first delete all the active time
functions.
To Set the Timer
1. Touch [TIME] until the display show
s
the
“TIMER”
writing.
2. Touch [INC] or [DEC] to set the desired timer
value, the hours will begin flashing: continue until
the desired value is set.
3. Touch [TIME] again to confirm the hour and
minutes will start flashing.
4. Touch [INC] or [DEC] to set the desired minutes
value or hold the key to change by 10 minute
steps.
5. Touch [TIME] again or wait for 5 seconds in order
to confirm the time.
6.
“TIMER”
will be steadily displayed.
7. When the time ends, reminder beeps will sound
for 15 minutes or until the [TIME] key is pressed.
8. Timer format is usually HR:MIN, switching into
MIN:SEC during the last minute.
9. The displayed value is always rounded to the
lower minute.
To remove oven rack from the oven:
1. Pull rack forward
2. Lift rack up at front and then remove it
To replace an oven rack:
1. Place rear of rack between rack level guides
2. While lifting front of rack, slide rack in all the
way while lowering the front
Oven
Telescopic Racks
The extendable rack allows for easier access to
cooking foods. It extends beyond the standard
flat rack bringing the food closer to the user.
CAUTION
When the rack is outside of the oven, slide arms do
not lock. They could unexpectedly extend if the rack
is carried incorrectly.
Extending slide arms could
cause injury. Rack should only be held or carried
by grasping the sides.
NOTE:
Always remove the extendable rack before
self-cleaning the oven.
CAUTION!
To avoid burns, pull rack all the way out
and lift pan above handle when transferring food to
and from oven.
Please refer to illustration on Page 7 if there is any
question as to which side is the front of the rack.
To remove extendable rack from the oven:
1. Lift of rack slightly and push it until the stop
release
2. Raise back of rack until frame and stop clear
rack guide
3. Pull rack down and out
To replace an extendable rack:
1. Grasp rack firmly on both sides. Place rack
(including frame) above desired rack guide
2. Push all the way in until the back of the rack
drops into place
3. Pull both sections forward until stops activate.
Rack should be straight and flat, not crooked
