FULGOR F4SP30x1 Series, Инструкция по использованию и уходу

Страница: 15 / 96

ENGLISH
15
Use & Care Manual
Turn the mode knob into the desired position, the
clock display shows On for a few seconds. The oven
will work for a maximum time (12hours). Depending
on the oven model, the number and type of available
functions can be different.
If the clock display function is active the symbol
appears (it doesn’t appear in light position).
Turn the Temp & Time selector and set the desired
oven temperature. The control offers a PRESET
temperature per every cooking mode or a full range
+ &%# &"‰ 
Check the value on the display after having selected
the temperature.
The temperature appears on the clock display when
the Time & Temp selector is pushed or when a new
function has just been selected.
As soon as the oven starts, the preheat led (indicated
by the bars) on the bottom of the clock display starts
* +
ends with a beep.
Turn the mode selector to ZERO (OFF) position to
stop any activity, the display will show
OFF for a few
seconds.
Setting an automatic oven function
After having selected a function as described before,
the control can be programmed in order to set timed
cooking activities. The time program remains active
Š)6
+ 6
1 Timed cooking setting the cooking time (duration).
2 Timed cookitng setting the end of cooking time
(stop time).
3 Delayed cooking setting duration and stop time.
Push the knob in order to toggle between cooking
duration (cook time) and end of cooking time (stop
6 + ‚ƒ ‚'ƒ
respectively.
Turn the knob left/right to edit the duration or the stop
+ + 6
1. When the word
dur is displayed, the control shows
30’ as the standard cooking duration. Turn the knob
left/right in order to set the actually desired cooking
time in a range between 0 and 240 minutes. The
+ *
dur and its value alternatively for
a few seconds then it will show the time of day,
the pot symbol and the letter to indicate that a
timed cooking is active. The end of cooking time is
updated automatically.
2. When the word End is displayed, the control shows
the current time as the initial stop time. In order to
set the actually desired end of cooking time in a 24
6
| / } *
| & * /
left/right.
- Push the knob to switch back and forth between
hours and minutes or wait a few seconds until
*
| & * / }
right.
- Wait until the new End of Cooking time value
*
+ * '
for a few seconds then it will show the time of day,
the
symbol and the letter to indicate that a
timed cooking is active. The cooking duration is
updated automatically.
3. Repeat the same operations of point 1 then push
the knob until End appears. the control shows the
“current time + cooking time” as the initial stop
time. It’s not possible to lower the end of cooking
time below this value. In order to set the actually
/ ]‹ 6
| / } *
| & * /
left/right.
- Push the knob to switch back and forth between
hours and minutes or wait a few seconds until the
*
| & *
knob left/right.
- Wait until the new End of Cooking time value
*
+ * '
for a few seconds then it will show the time of
day and the letter to indicate that a delayed
cooking has been programmed. As soon as the
delay time expires, the oven starts and works for
the programmed cooking time.The
symbol is
displayed.
At the end of any timed activity the control shuts down
the oven, the buzzer sounds a warning sequence (two
short beeps repeated every 3 seconds) to recall the
user attention, for a maximum time and makes the
time related icons (
, * !
the knob to silent the buzzer and reset the warning
message.
Turn the mode selector to ZERO (OFF) position
before reusing the oven.
Setting an oven function manually