21
I n s t r u c t i o n M a n u a l M o d e l D R X - 4 C
5. Once the scale has finished taring, “Scan” will appear on the display
indicating you should scan the NDC code associated with the drug.
4. To tare the container, press the “T” button.
Note:
If NDC Verification has been enabled, two NDC codes must be
scanned to allow the scale to check whether there is a match
between the two codes. For more information on
NDC verification please turn to Chapter 14 of this manual.
6. Scan the NDC code by placing it slowly under
the scanner light.
7. The display will then indicate to begin filling.
The word FILL will flash on the display for
approximately 5 seconds. At any time during
the FILL command, begin to fill the
remainder of the pieces.
