12
10. SETTING THE ROOM TEMPERATURE
DETECTION LOCATION
10.1. Without zone control
The detection location of the room temperature can be selected from the
following 2 examples. Choose the detection location that is best for the
installation location.
Refer to “9.2. Function setting”.
A. Indoor unit setting (factory setting)
The room temperature is detected by the indoor unit temperature sensor.
:KHQXVHWKLVIXQFWLRQVHW³,QGRRUURRPWHPSHUDWXUHVHQVRUVZLWFKLQJ
function (Function Number:42)” to “No(00)”.
A
Indoor unit
B. Indoor unit/remote controller setting (room temperature sensor
selection)
The temperature sensor of the indoor unit or the remote controller can be
used to detect the room temperature.
:KHQXVHWKLVIXQFWLRQVHW³,QGRRUURRPWHPSHUDWXUHVHQVRUVZLWFKLQJ
function (Function Number:42)” to “Yes(01)”.
(1)
(QDEOHWKHURRPWHPSHUDWXUHVHQVRUVHOHFWLRQLQIXQFWLRQVHWWLQJZKLFK
will be described later.
(2) Select either of the temperature sensor on the indoor unit or on the
UHPRWHFRQWUROOHUIRUWHPSHUDWXUHGHWHFWLRQ)RUKRZWRFRQ¿JXUHWKH
VHWWLQJUHIHUWRWKHRSHUDWLQJPDQXDO
B
Indoor unit
CAUTION
:KHQVHOHFWWKH³5HPRWHFRQWUROOHUVHWWLQJ´LIWKHGHWHFWHGWHPSHUDWXUH
value between the temperature sensor of the indoor unit and the tempera
WXUHVHQVRURIWKHUHPRWHFRQWUROOHUYDULHVVLJQL¿FDQWO\LWLVOLNHO\WRUHWXUQ
to the control status of temperature sensor of the indoor unit temporarily.
As the temperature sensor of remote controller detects the tempera
WXUHQHDUWKHZDOOZKHQWKHUHLVDFHUWDLQGLIIHUHQFHEHWZHHQWKHURRP
WHPSHUDWXUHDQGWKHZDOOWHPSHUDWXUHWKHVHQVRUZLOOQRWGHWHFWWKHURRP
temperature correctly sometimes. Especially when the outer side of the
ZDOORQZKLFKWKHVHQVRULVSRVLWLRQHGLVH[SRVHGWRWKHRSHQDLULWLV
recommended to use the temperature sensor of the indoor unit to detect
the room temperature when the indoor and outdoor temperature differ
HQFHLVVLJQL¿FDQW
The temperature sensor of the remote controller is not only used when
there is a problem in the detection of the temperature sensor of the indoor
unit.
1 ) Indoor room temperature sensor switching function
(Only for Wired remote controller)
The following settings are needed when use the control by Wired remote
controller temperature sensor.
( ...Factory setting)
Setting Description
Function No.
Setting No.
No
42
00
Yes
01
* If setting No. is “00” :
Room temperature is controlled by the indoor unit temperature sensor.
* If setting No. is “01” :
Room temperature is controlled by either indoor unit temperature sensor
or remote controller unit sensor.
2 ) Setting record
Record the setting change in the following table.
Setting Description
Setting No.
Indoor room temperature
sensor switching function
$IWHUFRPSOHWLQJWKH)81&7,216(77,1*EHVXUHWRWXUQRIIWKHSRZHU
and turn it on again.
10.2. With zone control
The detection location of the room temperature can be selected from the
following 2 examples. Choose the detection location that is best for the
installation location.
Refer to “9.2. Function setting”.
A. Indoor unit setting (factory setting)
The room temperature is detected by the indoor unit temperature sensor.
:KHQXVHWKLVIXQFWLRQVHW³,QGRRUURRPWHPSHUDWXUHVHQVRUVZLWFKLQJ
function (Function Number:42)” to “No(00)”.
A
Indoor unit
=RQHFRQWURO
interface
B. Indoor unit/remote controller/optional sensor setting (room tempera-
ture sensor selection)
7KHWHPSHUDWXUHVHQVRURIWKHLQGRRUXQLWWKHUHPRWHFRQWUROOHURUWKH
optional sensor can be used to detect the room temperature.
:KHQXVHWKLVIXQFWLRQVHW³,QGRRUURRPWHPSHUDWXUHVHQVRUVZLWFKLQJ
function and room temperature control switching (Function Number:42
and 48)” to “Yes(01)”.
(1)
(QDEOHWKHURRPWHPSHUDWXUHVHQVRUVHOHFWLRQLQIXQFWLRQVHWWLQJZKLFK
will be described later.
(2)
6HWWKHURRPWHPSHUDWXUHFRQWUROPHWKRGLQIXQFWLRQVHWWLQJZKLFKZLOOEH
described later.
(3)
6HW&RQQHFWLRQVWDWHRIRSVHQVRUDQG7HPSHUDWXUHVHQVRUVHWWLQJ
which will be described later.
(4)
6HOHFWDQ\RIWKHWHPSHUDWXUHVHQVRURQWKHLQGRRUXQLWRQWKHUHPRWH
FRQWUROOHURUWKHRSWLRQDOVHQVRUIRUWHPSHUDWXUHGHWHFWLRQ)RUKRZWR
FRQ¿JXUHWKHVHWWLQJUHIHUWRWKHRSHUDWLQJPDQXDO
B
Indoor unit
=RQHFRQWURO
interface
Optional
sensors
CAUTION
As the temperature sensor of remote controller or optional sensor detects
WKHWHPSHUDWXUHQHDUWKHZDOOZKHQWKHUHLVDFHUWDLQGLIIHUHQFHEHWZHHQ
WKHURRPWHPSHUDWXUHDQGWKHZDOOWHPSHUDWXUHWKHVHQVRUZLOOQRWGHWHFW
the room temperature correctly sometimes. Especially when the outer
side of the wall on which the sensor is positioned is exposed to the open
DLULWLVUHFRPPHQGHGWRXVHWKHWHPSHUDWXUHVHQVRURIWKHLQGRRUXQLWWR
detect the room temperature when the indoor and outdoor temperature
GLIIHUHQFHLVVLJQL¿FDQW
