10
9.6. Zone initial setting
=RQHLQLWLDOVHWWLQJLVDGHGLFDWHGVHWWLQJIRU]RQHFRQWUROOHGV\VWHP
Enable items for zone initial setting are displayed.
7KLVSURFHGXUHFKDQJHVWKHLQLWLDOVHWWLQJVXVHGWRFRQWURO]RQHFRQWUROOHG
system according to the installation conditions.
Incorrect settings can cause the indoor unit to malfunction. This procedure
should be performed by authorized installation or service personnel only.
Perform the “ZONE INITIAL SETTING” according to the installation condi
tions using the remote controller.
Perform the setting during the operation is stopped.
6HOHFW>=RQHLQLWLDOVHWWLQJ@ZLWKWKH>&XUVRUEXWWRQ8S'RZQ@DQGSUHVVWKH
[Enter button].
Back
Setting:
Service
Mo 10:00
Zone initial setting
[
2/2
]
Back
Setting:
Zone initial setting
Mo 10:00
Damper type setting
Connection state of op. sensor
Temperature sensor setting
Z o n e f u n c t i o n s e t t i n g
Number of outlets
Version
Function setting
-Note-
$IWHUWKHVHWWLQJLVFRPSOHWHGLWWDNHVVRPHWLPHXQWLOWKHDOOWKHVHWWLQJV
DUHUHÀHFWHG'RQRWWXUQRIIWKHSRZHURIWKH]RQHFRQWUROLQWHUIDFHZKLOH
6HWWLQJVDUHEHLQJFRQ¿UPHGLVGLVSOD\HGRQWKHVFUHHQ
Settings are being confirmed.
$IWHUFRPSOHWLQJWKH=21(,1,7,$/6(77,1*EHVXUHWRWXUQRIIWKHSRZHU
and turn it on again.
9.6.1 Number of outlets
Set the number of outlet.
1
Select [Number of outlets] with pressing the [Cursor button (Up/
'RZQ@DQGSUHVVWKH>(QWHUEXWWRQ@
Back
Setting:
Zone initial setting
Mo 10:00
Damper type setting
Connection state of op. sensor
Temperature sensor setting
Z o n e f u n c t i o n s e t t i n g
Number of outlets
Version
Function setting
2
6ZLWFKWKHVHWWLQJLWHPZLWKWKH>&XUVRUEXWWRQ/HIW5LJKW@DQGVHW
WKHQXPEHURIRXWOHWVZLWK>&XUVRUEXWWRQ8S'RZQ@DQGSUHVVWKH
[Enter button].
Number of outlets
Cancel:
OK:
Zone
2
Zone
1
Zone
6
Zone
7
Zone
8
Common
Zone
5
Zone
3
Zone
4
0
1
0
0
0
0
0
0
0
-Note-
Not the all the setting value cannot be set to "0".
,IWKLVVHWWLQJLVFKDQJHGWKHVHWWLQJLQ=RQHVLQJOH=RQHJURXS
and "Weekly timer setting" will be updated. Make sure to inform the user
WRFRQ¿UPWKHXSGDWHGVHWWLQJ
9.6.2 Damper type setting
Set when you use spring return damper.
1
Select [Damper type setting] with pressing the [Cursor button (Up/
'RZQ@DQGSUHVVWKH>(QWHUEXWWRQ@
Back
Setting:
Zone initial setting
Mo 10:00
Damper type setting
Connection state of op. sensor
Temperature sensor setting
Z o n e f u n c t i o n s e t t i n g
Number of outlets
Version
Function setting
2
Switch the damper type "Not in use" or "In use" with [Cursor button
8S'RZQ@DQGSUHVV>(QWHUEXWWRQ@
Spring return
damper
Not in use
Cancel:
OK:
Damper type setting
Mo 10:00
Number of ou...
Connection s...
-Note-
If a spring return damper is installed and this setting is changed to "In
XVHLWWDNHVVRPHWLPHXQWLOWKHDLUFRQGLWLRQHUVWDUWVWKHRSHUDWLRQDIWHU
\RXSUHVVWKH>2Q2IIEXWWRQ@,QWKDWFDVH2SHUDWLRQZLOOFRPPHQFHLQD
minute." is displayed on the screen for about 1 minute.
Mode
Menu
Cool
Monitor
Set temp.
Fan
Auto
°C
26
Mo 10:00
Operation will commence in a minute.
Zone (single)
9.6.3 Connection state of op. sensor
Set when you use optional sensor.
)RUGHWDLOVUHIHUWR:LWK]RQHFRQWURO
1
Select [Connection state of op. sensor] with pressing the [Cursor but
WRQ8S'RZQ@DQGSUHVVWKH>(QWHUEXWWRQ@
Back
Setting:
Zone initial setting
Mo 10:00
Damper type setting
Connection state of op. sensor
Temperature sensor setting
Z o n e f u n c t i o n s e t t i n g
Number of outlets
Version
Function setting
2
6ZLWFKWKHVHWWLQJLWHPZLWK>&XUVRUEXWWRQ/HIW5LJKW@DQGFRQ¿UP
ZLWKWKH>&XUVRUEXWWRQ8S'RZQ@DQGSUHVVWKH>(QWHUEXWWRQ@
Cancel:
Connection state of op. sensor
Not in use
In use
Optional sensor 2
Optional sensor 1
OK:
Mo 10:00
Damper type...
Temperature...
-Note-
,IWKLVVHWWLQJLVFKDQJHGWKHVHWWLQJLQ=RQHVLQJOH=RQHJURXS
and "Weekly timer setting" will be updated. Make sure to inform the user
WRFRQ¿UPWKHXSGDWHGVHWWLQJ
)RUWKHGHWDLOVRI2SWLRQDOVHQVRUDQG2SWLRQDOVHQVRUUHIHUWRWKH
LQVWDOODWLRQPDQXDORIWKH]RQHFRQWUROLQWHUIDFH
