Fujitsu UTY-RVN*M, Руководство по эксплуатации

Страница: 10 / 25

En-9
2
“Set temp. auto return” screen is displayed.
Set temp. auto return
Enable/Disable setting Disable
Return time and temp. setting
Time Temp. /
//
Cool/Dry 26
°C
30min.
/ 26
°C
30min. Heat
Mo 10:00
Setting: Back:
Air flow dire... Set temp. range
Select the item with the [Cursor button (Up/Down)], and
press the [Enter button].
3
For [Enable/Disable setting], select [Enable] or [Disable]
with the [Cursor button (Up/Down)], and press the [Enter
button] to complete the setting.
Set temp. auto return
Enable/Disable setting Enable
Return time and temp. setting
Time Temp. /
// Cool/Dry 26
°C
30min.
/ 26
°C
30min. Heat
Mo 10:00
OK: Cancel:
Air flow dire... Set temp. range
4
For [Return time and temp. setting], select operation
mode with the [Cursor button (Up/Down)], and press
the [Enter button]. Adjust the value with the [Cursor but -
ton (Up/Down)].
With the [Cursor button (Left/Right)], the cursor can be
switched [Time] and [Temp].
/
Set temp. auto return
Enable/Disable setting Enable
Return time and temp. setting
Time Temp.
Cool/Dry 26
°C
30min.
26
°C
30min. Heat
Mo 10:00
Air flow dire... Set temp. range
OK: Cancel:
To complete the setting, press the [Enter button]. To re-
turn to the “Function” screen, press the [Cancel button].
Notes
• The set time can be set from 30 to 120 minutes in
units of 10 minutes.
• Possible temperature setting ranges in the operation
mode are as follows:
Cool, Dry .......................... 18 to 30 °C (64 to 88 °F)
Heat .................................. 16 to 30 °C (60 to 88 °F)
• If any ranges have been set in [Set temp. range]
setting, adjustable temperature range in this setting
follows the restricted range.
• If you set any ranges in the [Set temp. range] setting
after setting of [Set temp. auto return], the restricted
range set in the [Set temp. range] also overrides [Set
temp. auto return] setting.
• Even if the temperature setting change is done on
the secondary remote controller, it returns to the set
value in [Set temp. auto return] on the primary remote
controller.
3-2-2. Economy setting
1
In “Function” screen, select [Economy] with the [Cursor
button (Up/Down)].
Function
Air flow direction
Economy
Set temp. auto return
Set temp. range
Off
Disable
Disable
Timer
Mo 10:00
Setting: Back:
To change the setting, press the [Enter button].
2
Select [On] or [Off] by pressing the [Cursor button
(Up/Down)], and press the [Enter button] to complete
the setting.
Function
Air flow direction
Economy
Set temp. auto return
Set temp. range
On
Disable
Timer
Mo 10:00
Disable
OK: Cancel:
When you return to the “Monitor” screen, the icon is displayed.
To check the function, press the [Enter button] and select the
icon.
Cool
Monitor
High
°C
26
Menu
Economy
Mo 10:00
End:
3-2-3. Set temp. auto return setting
1
In “Function” screen, select [Set temp. auto return] with
the [Cursor button (Up/Down)].
Function
Air flow direction
Economy
Set temp. auto return
Set temp. range
Off
Timer
Disable
Disable
Mo 10:00
Setting: Back:
To change the setting, press the [Enter button].
9380221043_OM.indb 9 8/22/2012 3:54:58 PM