Fujitsu UTY-RNRUZ2, Руководство по эксплуатации, Страница: 17 / 26

(7) (8)
Auto Off
Cancel OK
Enable/Disable [Disable]
Absence Detection Time [In 24 hr]
Fri 10:00AM Enable/Disable
Cancel OK
Enable
Disable
When the [OK] is touched, the display returns to “Auto
Off” screen.
(9) Touch the [Absence Detection Time] on the “Auto Off”
screen.
(10) The “Absence Detection Time” screen is displayed. Set
the time with [ ] or [ ]. The time can be set from 1 to
24 hr.
(9) (10)
Auto Off
Cancel OK
Enable/Disable [Disable]
Absence Detection Time [In 24 hr]
Fri 10:00AM
Absence Detection Time
Cancel OK
In
hr
24
Fri 10:00AM
Note
When detection time the same as or shorter than “Auto
Saving” is set at “Auto Off”, “Auto Saving” does not oper-
ate.
When the [OK] is touched, the display returns to the “Auto
Off” screen. And when the [OK] on the “Auto Off” screen
is touched, the display returns to the “Human Sensor
Setting” screen.
When the [Back] on the “Human Sensor Setting” is
touched, the display returns to the “Special Setting”
screen.
3-5-7 Fan Control for Energy Saving
(for administrator)
(1) Touch the [Fan Control for Energy Saving] on the “Spe-
cial Setting” screen. When the “Password Verification”
screen is displayed, enter the password and touch the
[OK].
(2) “Fan Control for Energy Saving” screen is displayed.
Touch the [Enable] on the “Fan Control for Energy Sav-
ing” screen.
(1) (2)
Back
Previous
Page
Page 2/ 2
Special Setting
Human Sensor
Setting
Fan Control for
Energy Saving
Away Setting
Fan Control for Energy Saving
Cancel OK
Enable
Disable
When the [OK] is touched, the display returns to the
“Special Setting” screen.
3-6 Summer Time (Daylight Saving Time)
Setting (for administrator)
The time display and timer operation are 1 hour earlier than
usual.
(1) Touch the [Summer Time
Setting] on the “Main Menu”
screen.
Monitor
Previous
Page
Page 2/ 2 Main Menu
Summer Time
Setting
Initial Setting Maintenance
Preference
Enable or Disable the Summer Time Setting
(1) “Summer Time Setting” screen
is displayed. Select the [En-
able] or [Disable] on the “Sum-
mer Time Setting” screen.
Summer Time Setting
Cancel OK
Enable
Disable
When the [OK] is touched, after the setting change
screen is displayed, the display returns to the “Main
Menu” screen.
3-7 Preference (for administrator)
Settings of the Touch Panel Display
(1) Touch the [Preference] on the “Main Menu” screen.
(2) “Preference” screen is displayed.
(1) (2)
Monitor
Previous
Page
Page 2/ 2 Main Menu
Summer Time
Setting
Initial Setting Maintenance
Preference
Back
Preference
Panel
Calibration
Backlight
Setting
Contrast
The following contents are set:
• Panel Calibration:
When the touched position and the corresponding
position does not match on the screen, perform this
setting.
• Backlight Setting:
Backlight enable/disable, brightness, and off time can
be set.
• Contrast:
Adjusts the contrast of the screen.
When the item to be set is touched, the display switches
to each setting screen. When each setting is complete
or canceled, the display returns to this screen. When
[Back] is touched, the display returns to the “Main Menu”
screen.
En-15
En-16