23
3.
BASIC OPERA
TION
Use
and
to select the desired central
control number from the 100 segments, press
SET
. (The central remote controller will be in a
wait mode for a signal from the indoor unit.)
• If you wish to delete the operations for manual stor-
ing 2 using this storing screen, press
BACK
to
return to screen 1.
Operation is performed for the indoor units that are
to be stored to the central control number that was
selected in 3. (You must go to the actual location of
installation and perform the operation from the stan-
dard remote controller.) By performing the opera-
tion, the operating information is sent to the central
remote controller and is stored in the central con-
trol number that was selected on the central remote
controller.
Repeat the step 4. Use the standard remote con-
troller to turn the indoor units on in sequence. Each
time the central control number is stored using the
operation in step 4, it will be automatically increased
by 1.
Once all the storing has been completed, press
SET
to return to the initial setting menu in 1.
Turn on power
Initial setting
Clock setting
Group information store
Test operation
Se_Ch3_p11-29.p65
01.5.22, 4:04 PM
23
