9
2.
SYSTEM OUTLINE
CENTRAL CONTROL AREA
Displays the various kinds of information.
Comes on together with an individual status display.
Comes on during various setting.
Comes on or flashes when error is detected.
Flashes in the period of sending the new setting from the central remote controller to other
units.
Comes on during test operation.
Displays the stored central control number and the operating status of the currently
selected indoor units.
To change the control mode (individual / group / all).
To switch to the next screen of the central control numbers by 100.
To start the group setting.
To switch to error code display.
To confirm the new setting and to send signals to the indoor units whose settings need to
be changed.
To start test operation.
Lights up when the new setting has been made. It will go out when the newly set
information has been sent to the relevant indoor units.
To cancel the just made setting and to return to the previous screen.
To delete the set item.
To select the central control number in central control display.
To start the operation of all indoor units stored in the central remote controller.
To stop the operation of all indoor units stored in the central remote controller.
Flashes when error occurs. It will light up when an indoor unit is operating.
7
STATUS DISPLAY
8
MONITOR DISPLAY
9
SETTING DISPLAY
0
ERROR DISPLAY
A
TRANSMIT INDICATOR DISPLAY
B
TEST DISPLAY
C
GROUP CONTROL DISPLAY
D
ALL / GROUP BUTTON
E
SELECT
×××××
100 BUTTON
F
GROUP SETTING BUTTON
G
CHECK BUTTON
H
SET BUTTON
I
TEST BUTTON
J
SET LED
K
BACK BUTTON
L
DELETE BUTTON
M
SELECT BUTTON
N
ALL ON BUTTON
O
ALL OFF BUTTON
P
ALL ON / OFF LED
OPERATION CONTROL AREA
Shows the set temperature.
Shows the set fan speed.
Shows the current operating mode.
Comes on when the indoor unit is set in the cooling and heat pump type refrigerant system.
Shows the method to control the airflow direction.
Shows the operating condition (ON / OFF) of the indoor units associated with the selected
central control number.
To turn the selected indoor units on and off.
To set room temperature.
To change the fan speed.
To set the angle or movement of up / down swing of the flaps.
To change the operating mode.
To set the angle or movement of right / left swing of the flaps.
Q
TEMPERATURE DISPLAY
R
FAN CONTROL DISPLAY
S
MASTER CONTROL DISPLAY
T
FIXED COOLING OR HEATING
DISPLAY
U
AIRFLOW DIRECTION DISPLAY
V
ON / OFF DISPLAY
W
ON / OFF BUTTON
X
TEMP. BUTTON
Y
FAN CONTROL BUTTON
Z
HORIZONTAL AIRFLOW DIRECTION
AND SWING BUTTON
[
MASTER CONTROL BUTTON
\
VERTICAL AIRFLOW DIRECTION AND
SWING BUTTON
TIMER CONTROL AREA
Displays the day of the week.
Shows the current time and address.
To delete all set value in the central remote controller.
To set the time.
To change the day.
To set ON/OFF time.
1
DAY OF THE WEEK DISPLAY
2
CLOCK AND ADDRESS DISPLAY
3
ALL CLEAR BUTTON
4
CLOCK ADJUST BUTTON
5
DAY BUTTON
6
TIME BUTTON
Se_Ch2_p03-10.p65
01.5.22, 4:04 PM
9
