Fujitsu U9310X Скачать руководство пользователя

Страница: 88 / 99

Troubleshooting and tips

The printer does not print

Printerdoesnotprint

Cause

Troubleshooting

The printer is not switched on.

►

Make sure that the printer is switched
on and ready for operation (refer to the
documentation supplied with the printer).

The printer is not connected correctly.

►

Check that the data cable connecting
the notebook to the printer is properly
connected.

The printer driver is faulty or not correctly
installed, or it is the wrong printer driver.

►

Check that the data cable connecting
the notebook to the printer is properly
connected.

►

Check whether the correct printer driver is
loaded (refer to the printer documentation).

The wireless connection to a network does not work

Thewireless connectiontoanetwork does notwork

Cause

Troubleshooting

The wireless component is disabled.

►

Switch the wireless component on (see

"Switching the wireless components on and
off", Page 50

The wireless component is enabled. Despite
this, the wireless connection to a network does
not work.

►

Check whether the wireless connection is
switched on via the software.

►

Further information on using the wireless
component can be found in the help

les.

The battery discharges too quickly

Battery:

Cause

Troubleshooting

The battery is either too hot or too cold. In this
case the battery indicator

ashes.

►

Move the notebook so that its temperature
returns to within the normal range.

►

If the operating time of the battery life is
extremely short, the battery is probably too
old. If necessary, have the battery replaced
by an authorised service provider.

You may have an application running that
consumes a great deal of power due to frequent
accessing of the hard disk or optical drive.

►

Use the mains adapter as frequently as
possible.

The maximum brightness may have been set
for the screen.

►

Set the screen slightly darker with the
key combination for

Decreasing the screen

brightness

in order to reduce the amount of

power being drawn.

Fujitsu

Содержание U9310X




































































































Результаты поиска

Содержание U9310X

Отзывы:

Похожие инструкции для U9310X

Бренды по названию

Популярные бренды

Fujitsu U9310X, Руководство по эксплуатации

Результаты поиска

Содержание U9310X

Отзывы:

Похожие инструкции для U9310X

Бренды по названию

Популярные бренды