Fujitsu Stylistic 3500 Скачать руководство пользователя страница 12 | Manualshive

Страница: 12 / 110

background image

Supported Operating Systems

2

Chapter 2

System Software

This chapter outlines system software supported on the Stylistic 3500 pen tablet including operating
system software, and drivers and utilities developed specifically for the Stylistic 3500 pen tablet system.

Supported Operating Systems

2

The Stylistic 3500 pen tablet is distributed with one of the following operating systems preinstalled:

• Windows 98
• Windows NT Workstation 4.0 (Build 1381, SP 6a)
• Windows 2000

Licensing and user documentation for the operating system installed on your system is also included
with the pen tablet. For details on the operating system, refer to the documentation provided, or refer to
the documents listed in “Related Documentation” in the About This Manual section of this guide.

Note:

MS-DOS is not supported as an end-user operating environment. Support for MS-DOS is limited to the
use of configuration and other support utilities designed for the Stylistic 3500 pen tablet system.

Pen Support

2

Pen support for the Stylistic 3500 pen tablet is provided by the following three pen subsystems:

• Microsoft Pen Services 2.0 with CIC HRS 5.0.5 (Windows 98 only)

• CIC PenX 2.02 (All systems)

• Mouse Emulation (All systems)

You can select one of these subsystems “on the fly” using the pen configuration control panel applet. See
“Pen Configuration” on page 4 for details. (Software for all of these subsystems runs at the same time.
Pen information is routed to the selected subsystem.)

Pen drivers (developed by Fujitsu PC Corporation) for the Stylistic 3500 support the pen digitizer system
as a Plug and Play (PnP) device. To view information on these pen drivers, open Pen Configuration in
Control Panel and choose the About tab. Select the desired file from the list and choose File Info.

PC Card Support

2

The Stylistic 3500 pen tablet fully supports the PC Card standard release 3.0. System resources for PC
Cards are configured automatically by Windows 98 and Windows 2000.

Phoenix/Softex Card Executive 2.0 for Windows NT is preinstalled on Windows NT systems to provide
PC Card support. Refer to the on-line help provided with Phoenix/Softex Card Executive for details on
supported PC Cards.

Overview of System Configuration Tools and Utilities

2

The following system configuration tools and utilities are supported for use with the pen tablet. Unless
otherwise noted, details on using these programs are given in Chapter 3 of this manual.

«
...
10
11
12
13
14
...
»

Содержание Stylistic 3500















































































































Отзывы:

Нет отзывов

Похожие инструкции для Stylistic 3500

Бренд: Naxa Страницы: 2

Бренд: Navman Страницы: 16

Бренд: Tait Страницы: 4

Бренд: Tait Страницы: 14

Бренд: Tait Страницы: 48

Бренд: Tait Страницы: 27

Бренд: Tait Страницы: 52

Бренд: Sangean Страницы: 25

Бренд: Sangean Страницы: 107

Бренд: NXP Semiconductors Страницы: 45

Бренд: Dared Страницы: 6

Hello Kitty HK78

Бренд: Emerson Страницы: 2

Бренд: Emerson Страницы: 2

Бренд: Emerson Страницы: 2

Бренд: Emerson Страницы: 4

Бренд: Sepura Страницы: 12

Wireless Antenna

Бренд: B&B Electronics Страницы: 16

Бренд: Armour Home Electronics Страницы: 25

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды