Fujitsu Stylistic 2300, Техническое справочное руководство

Страница: 39 / 140

BIOS Setup 3-19
Boot Menu Options
Boot menu options are described in Table 3-11.
Boot Sequence Submenu
Table 3-12 describes settings in the Boot Sequence submenu.
Table 3-11 BIOS Setup Boot Menu Options
Option Settings Description
QuickBoot Mode Enabled
Disabled Determines whether the full set of tests are run
during the Power-On Self Test (POST).
When Enabled is selected, the following occurs:
• A less extensive memory test is performed and
the size of installed memory is not displayed
during the memory test.
• The Real Time Clock (RTC) is not tested.
When Disabled is selected, the full set of tests are
run.
Boot-Time Diagnostic
Messages Enabled
Disabled Determines whether status messages are displayed
as the Power On Self Test (POST) is performed.
Select Enabled to display messages.
If Disabled is selected, messages are not displayed
and the logo screen is displayed. (If POST errors
occur, POST messages are displayed regardless of
this setting.)
Setup Prompt Enabled
Disabled Determines whether the BIOS Setup prompt
message is displayed when you start the system.
Select Enabled to display the message.
If Disabled is selected, the message is not displayed,
and you must attach an external keyboard and press
F2 while the system is booting to enter BIOS Setup.
(You cannot enter BIOS Setup by double-tapping
with the pen when this option is disabled.)
BOOT SEQUENCE
SUBMENU Select this submenu to configure the order in which
drives are searched for a bootable image.
Numlock Off
Auto
On Determines the initial state of the keyboard Numlock.
Select Auto to turn on Numlock automatically if a
keyboard is connected when you start the system.
Table 3-12 BIOS Setup Boot Sequence Submenu
Setting Description
1. [Diskette Drive]
2. [Hard Drive] Determines the order that the systems searches
drives for a bootable image.
Tap on item 2 to change the boot sequence.
1. [Hard Drive]
2. [Diskette Drive]
Microsoft Corp. Exhibit 1020