Fujitsu SPARC M10-1, Руководство по безопасности и соответствию

Страница: 15 / 63

Safety Agency Compliance Statements
12
SELV Compliance
Safety status of I/O connections comply to SELV
requirements.
Power Cord Connection
Caution – Fujitsu products are designed to
work with power systems having a grounded
neutral (grounded return for DC-powered
products). To reduce the risk of electric
shock, do not plug Fujitsu products into any
other type of power system. Contact your
facilities manager or a qualified electrician if
you are not sure what type of power is
supplied to your building.
Caution – Not all power cords have the
same current ratings. Do not use the power
cord provided with your equipment for any
other products or use. Household extension
cords do not have overload protection and
are not meant for use with computer
systems. Do not use household extension
cords with your Fujitsu product.
The following caution applies only to devices with a
Standby power switch:
Caution – The power switch of this product
functions as a standby type device only. The
power cord serves as the primary disconnect
device for the system. Be sure to plug the
power cord into a grounded power outlet that
is nearby the system and is readily
accessible. Do not connect the power cord
when the power supply has been removed
from the system chassis.
The following caution applies only to devices with
multiple power cords:
Caution: Shock hazard – For products with
multiple power cords, all power cords must
be disconnected to completely remove
power from the system.
Battery Warning
Caution – There is danger of explosion if
batteries are mishandled or incorrectly
replaced. On systems with replaceable
batteries, replace only with the same
manufacturer and type or equivalent type
recommended by the manufacturer per the
instructions provided in the product service
manual. Do not disassemble batteries or
attempt to recharge them outside the
system. Do not dispose of batteries in fire.
Dispose of batteries properly in accordance
with the manufacturer’s instructions and
local regulations. Note that on Fujitsu
motherboard units, there is a lithium battery
molded into the real-time clock. These
batteries are not customer replaceable parts.
System Unit Cover
You must remove the cover of your Fujitsu computer
system unit to add cards or memory. Be sure to replace
the cover before powering on your computer system.
Caution – Do not operate Fujitsu products
without the cover in place. Failure to take
this precaution may result in personal injury
and system damage.