SK-MB9EF120-002,-003
Connectors
© Fujitsu Semiconductor Europe GmbH
- 23 -
UG-9E0010-11
5.5 CAN-Bus Connector (X5)
This is a standard pin-out used for industrial CAN.
Pin
Signal
Description
1
NC
Not used
2
CANL
default low CAN-bus signal (inverted differential line)
3
GND
Ground
4
NC
Not used
5
NC
Not used
6
NC
Not used
7
CANH
default high CAN-bus signal (non-inverted differential line)
8
NC
Not used
9
NC
Not used
Shield
Shield
Tied to GND via 1M0||100nF
Check jumpers when using CAN to have the signals connected to the bus-driver. Also make sure the
related ports are not connected elsewhere via the B2B connectors.
5.6 USB-Serial Connector (X6)
Standard USB Mini-B Plug.
Pin
Signal
Description
1
VBUS
+5.0V Supply from Host. Powers the USB/Serial Converter FT232R
2
D-
inverted data-line
3
D+
non-inverted data-line
4
ID
leave open
5
GND
Reference-voltage
Shield
Shield
Tied to GND via 1M0||100nF
Check jumpers when using USB/UART to have the signals connected to the bus-driver. Also make
sure the related ports are not connected elsewhere via the B2B connectors.
