Fujitsu SH-E514TR1 10 Скачать руководство пользователя страница 33

Страница: 33 / 71

SH-E514TR1 10 Gigabit Ethernet SmartPro Switch User Manual

SNMPv2c -

Select to allow the group user to use the SNMPv2c security model.

SNMPv3 -

Select to allow the group user to use the SNMPv3 security model.

Security Level:

When selecting

SNMPv3

in the

User-based Security Model

drop-down list, this option is available.

NoAuthNoPriv -

Specify that there will be no authorization and no encryption of packets sent between the

Switch and a remote SNMP manager.

AuthNoPriv -

Specify that authorization will be required, but there will be no encryption of packets sent

between the Switch and a remote SNMP manager.

AuthPriv -

Specify that authorization will be required, and that packets sent between the Switch and a remote

SNMP manger will be encrypted.

Read View Name:

Enter the read view name that the group user can access.

Write View Name:

Enter the write view name that the group user can access.

Notify View Name:

Enter a write view name that the group user can access. The notify view describes the object that

can be reported its status via trap packets to the group user.

Click

Add

to add a new entry based on the information entered.

Click

Delete

to remove the specified entry.

SNMP Engine ID Local Settings

The Engine ID is a unique identifier used for SNMP V3 implementations on the Switch.

Figure 8-8 SNMP Engine ID Local Settings

The fields that can be configured are described below:

Engine ID:

Enter the engine ID string with the maximum of 24 characters.

Click

Default

to revert the engine ID to the default.

Click

Apply

to accept the changes made.

SNMP User Table Settings

This window is used to configure and display the SNMP users that are currently configured on the Switch.

Figure 8-9 SNMP User Table Settings

The fields that can be configured are described below:

User Name:

Enter an alphanumeric string of up to 32 characters. This is used to identify the SNMP users.

Содержание SH-E514TR1 10








































































Результаты поиска

Содержание SH-E514TR1 10

Отзывы:

Похожие инструкции для SH-E514TR1 10

Бренды по названию

Популярные бренды

Fujitsu SH-E514TR1 10, Руководство пользователя

Результаты поиска

Содержание SH-E514TR1 10

Отзывы:

Похожие инструкции для SH-E514TR1 10

Бренды по названию

Популярные бренды