Fujitsu SCENICVIEW P17-3P, Руководство по эксплуатации

Страница: 28 / 42

Operation
Notes on power management
If your computer is equipped with power management, the monitor can support this function
fully. The monitor does not distinguish between the individual power management modes of
the computer (standby mode, suspend mode and OFF mode), as it is capable of immediately
switching into the mode with the highest energy-saving effect.
Stage ON Power management mode
Power indicator lights up blue lights up orange
Function the monitor is working normally the screen is dark
Power consumption (typical) P17-3P
Max. brightness 34 W
acc. to EPA 29 W
P19-3
Max. brightness 38 W
acc. to EPA 26 W
P19-3P
Max. brightness 38 W
acc. to EPA 31 W
reduced to < 1 W
If your computer detects inactivity (no input) it sends an appropriate signal to the monitor
to reduce the power consumption (power management mode). The power indicator of
the monitor changes colour to indicate the status change.
Once an input is made at the computer the screen contents are redrawn.
For detailed information on how power management mode operates refer to
the operating manual or technical manual of the computer.
When the monitor is switched to the power management mode by the power
management system a power consumption of up to 1 W is maintained to
feed the circuit for redrawing the screen contents.
To completely switch off the power consumption, switch off the monitor
with the main switch at the rear.
20 A26361-K1240-Z120-7619, edition 1