Fujitsu SCENICVIEW A17-3, Руководство по эксплуатации

Страница: 31 / 34

SCENICVIEW A17-3/A19-3
Having this problem? Check the following points:
Picture is wrongly adjusted ► Adjust the monitor automatically (using the AUTO
button - if provided - or using the OSD menu).
Picture disturbances (vertical lines) ► Adjust the monitor automatically (using the AUTO
button - if provided - or using the OSD menu).
Picture disturbances (horizontal lines,
picture noise) ► Adjust the monitor automatically (using the AUTO
button - if provided - or using the OSD menu).
The screen becomes darker
► Adjust the monitor automatically (using the AUTO
button - if provided - or using the OSD menu).
► Set the contrast and brightness correctly using the
OSD menu if the auto-adjustment function does
not give satisfactory results.
Notes regarding the DIN EN ISO 13406-2 standard
Permanently unlit or lit pixels
The standard of production techniques today cannot guarantee an absolutely fault-free screen
display. A few isolated constant lit or unlit pixels (picture elements) may be present. The maximum
permitted number of pixels faults is stipulated in the stringent international standard ISO 13406-2
(Class II).
Example: A 17"/19” flat-screen monitor with a resolution of 1280 x 1024 has 1280 x 1024 = 1310720
pixels. Each pixel consists of three subpixels (red, green and blue), so there are almost 4 million dots
in total. In accordance with ISO 13406-2 (Class II), a maximum of 6 pixels and also 7 subpixels may
be faulty.
A26361-K1146-Z120-1-7619, edition 1 23