Fujitsu PRIMERGY RX900 S2, Руководство по эксплуатации

Страница: 25 / 114

RX900 S2
Operating Manual 25
Functional overview
DIMM memory modules
Each CPUMEMR can be equipped with up to 16 DDR3 memory modules (1333
MHz) with 4 GB, 8 GB or 16 GB capacity. In addition, 32 GB memory modules
will be available allowing maximum memory capacity of 4 TB.
For information on supported DIMM memory modules see the configurator of
the server:
http://ts.fujitsu.com/products/standard_servers/rack/primergy_rx900s2.html (for the
EMEA market)
The minimum memory configuration is four CPUMEMRs. CPUMEMRs are
populated in four steps. In each step, four DIMM memory modules are added.
At least four DIMM memory modules must be installed on CPUMEMR #1 and
#2. CPUMEMRs #3 to #8 can be left empty.
ECC with memory scrubbing and the Single Device Data Correction (SDDC)
function is standard.There are two modes of operation for the main memory:
●
Independent Channel Mode / Performance Mode (recommended)
●
Mirrored Channel Mode
For information on the population requirements for different memory modes see
"Baseboard D3144, CPUMEMR D3145, PCIR D3146 for PRIMERGY
RX900 S2 Technical Manual".
2.2.2 Expansion cards in PCIe slots
The RX900 S2 server offers 16 PCI Express slots with x8 connector:
●
PCI Riser (PCIR)
– 1x PCIe Gen2 slot with x4 bandwidth without PCI Hot-Plug (PHP)
capability
– 6x PCIe Gen2 slots with x8 bandwidth without PHP capability