RX300 S5
Operating manual
15
Preface
Features
Accessible drives/components
A number of mounting locations are available:
–
One 3.5-inch slimline bay for an optional Local Service Module:
ServerView Local Service Display (LSD) or
ServerView Local Service Panel (LSP)
–
One 3.5-inch slimline bay for an optional optical drive
For a configuration with 3.5-inch HDD modules, an optional DAT or RDX drive
can be installed in the right-hand drive cage. This means that the top two bays
of the drive cage are occupied and are no longer available for HDD modules.
For the configuration with 8*2.5-inch HDD modules, an optional 3.5-inch DAT or
RDX drive can be installed next to the right-hand drive cage.
I
The accessible drives/components described in this section cannot be
replaced during operation.
USB port (external)
Three USB ports on the front of the device support activities carried out by the
service technician. The maximum length of the external cable is two meters for
the USB ports on the front.
Another four USB ports are available on the rear of the device.
USB port (internal)
Additional USB ports are available on the system board: one is for an optional
DAT drive or an optional RDX drive. Other ports can be used for either a UFM
or a USB stick.
