Fujitsu PRIMERGY RX200 S3, Инструкция по настройкам

Страница: 42 / 57

42 Options Guide
RX200 S3
Installing the server in the rack Completion
9.2 Installing the server in the rack
Figure 25: Installing the server in the rack
V
CAUTION!
At least two people are needed to position the server in the rack.
Ê
Push the prepared server into the rails that are attached to the rack until the
server rails engage.
I
Ensure that the server is inserted horizontally and is not tilted.
Ê
Press the safety springs in on both sides (2).
Ê
Gently push the server as far as it will go into the rack (3).
Ê
Fasten the server to the rack (4) using the two knurled screws (front panel).
Ê
Plug in all plugs and switch the server on.
1
2
3
4
4