Fujitsu PRIMERGY RX100 S6, Инструкция по настройкам

Страница: 23 / 76

RX100 S6
Options Guide 23
4 Preparation
V
CAUTION!
●
Before removing or attaching covers, turn off the server, all peripheral
devices, and any other connected devices. Also unplug all power
cables from the outlet. Failure to do so can cause electric shock.
●
Only for rack model:
Use the anti-tilt plate to prevent the rack from tipping when installing
the rack. Pulling the server out of the rack without having installed the
anti-tilt plate may cause the rack to tip over.
●
Only for rack model:
Be careful not to pinch fingers or clothes when sliding out the server
or pushing it back. Failure to do so may cause injury.
●
Before attaching the cover, make sure no unnecessary parts or tools
are left inside the server.
●
Before turning on the server, make sure the cover is closed.
●
Follow the safety instructions in the chapter "Safety instructions" on
page 15 .
4.1 Opening the server
Ê
Exit all applications and shut down the server properly.
Ê
Press the On/Off button if the server has not been switched off by the
operating system.
Ê
Pull all power connectors out of the power outlets.
Ê
Disconnect all cables on the rear of the server.