Fujitsu Primergy RX100 S4, Руководство по эксплуатации

Страница: 45 / 85

RX100 S4
Operating manual 45
Hardware installation Connecting devices to the server
4.4 Connecting devices to the server
The ports for external devices are on the front and rear of the server. The
additional ports available on your server depend on the PCI boards installed.
The standard ports on the rear are marked with symbols, and some are color-
coded:
Figure 8: Ports on the rear
An additional USB port is located on the front of the server on the right.
I
The COM1 port (1) is disabled by default. This setting can be changed in
the
BIOS Setup
.
I
Some of the devices that can be connected may require special drivers
(see the documentation for the connected device).
Ê
Connect the data cables to the server and peripherals.
1 Serial port (COM1) 4 Monitor port (VGA) (blue)
2 Mouse port (PS/2) (green) 5 LAN port 1 (Service LAN)
3 Keyboard port (PS/2) (purple) 6 LAN port 2
7 USB ports 1 and 2
2
7 5 6
1
4 3