44
3.4
Attaching the covers to a rackmount type
Attach the front, left side and rack front covers in this order.
Attaching the front covers
1
Attach the front cover bracket to both ends of the server.
Fix the two places of right and
left with an attached the M4
tap tight screws respectively.
2
Attach the front cover to front of the server.
Insert lower two tabs first.
Afterwards, insert upper three tabs.
Reattaching the left side cover
Reverse the procedure in "3.2 Removing the covers from a tower type" (
pg.39) to reattach the left
side cover to the server.
CAUTION
`
Make sure that all expansion cards are properly inserted in their slots before
reattaching the left side cover. Some expansion cards may have become loose while
performing the conversion.
• Before reattaching the left side cover, check to see whether any tools were left
inside the server.
[Left side]
Screw
hole
Tab in the upper side
Tab in the lower side
