manualshive.com logo in svg

Fujitsu PRIMERGY Econel 100, Руководство по эксплуатации

Поделиться
Скачать
Fujitsu PRIMERGY Econel 100 Скачать руководство пользователя страница 45

Econel 100

Operating Manual

45

Troubleshooting and Tips

Incorrect Time and/or Date

7.7

Incorrect Time and/or Date

Ê

Set the time and date in the operating system or in the 

BIOS Setup

 under the 

Main

 menu with 

System Time

 and 

System Date

 respectively.

I

If the time and date are still wrong after the server has been switched off 
and back on again, change the lithium battery (for a description see the 
D2179 system board Technical Manual), or contact our customer service 
team.

7.8

Drives Are Reported as “Dead”

RAID controller configuration incorrect

Ê

Check and correct the settings for the drives with the RAID controller utility.

Further information is provided in the manual on the RAID controller.

7.9

Added Drive Reported Defective

This error message may occur when the server has a RAID controller:

RAID controller is not configured for this hard disk drive

Ê

Reconfigure the RAID controller for the drive with the corresponding utility. 
Information is contained in the documentation on the RAID controller.

If the hard disk drive continues to be shown as defective, then replace it (see 
“PRIMERGY Econel 100 Server System Options Guide”).

7.10

Error Messages on the Screen

The meanings of the error messages are explained in the “BIOS Setup” manual 
and in the documentation for the relevant components and programs on the 
PRIMERGY 

ServerBooks

 CD.

Содержание PRIMERGY Econel 100

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды