Fujitsu PRIMEPOWER 1 Скачать руководство пользователя

Страница: 36 / 50

Chapter 5 Precautions

This chapter explains necessary precautions.

5.1 Limitations and known bugs for Solaris

This chapter explains limitations and known bugs for Solaris.

Table 5.1 Limitations and known bugs for Solaris

Limitations and known bugs

Recommended actions

Remarks

The following patches are required to be installed in the following order after installation

of Solaris 10. In particular 119254-06 must be installed before 119254-19 or later or

equivalent. If the installation order is not followed problems may occur.

E.g. non-global zone cannot be installed, optional packages and patches cannot be

installed correctly.

120719-01 or later SunOS 5.10: gzip patch

121296-01 or later SunOS 5.10: fgrep Patch

118815-03 or later SunOS 5.10: awk patch

120900-03 or later SunOS 5.10: libzonecfg Patch

121133-02 or later SunOS 5.10: zones library and zones utility patch

119254-06 SunOS 5.10: Install and Patch Utilities Patch

119254-19 or later: SunOS 5.10: Install and Patch Utilities Patch

119317-01 or later: SunOS 5.10: SVr4 Packaging Commands (usr) Patch

119042-02 or later: SunOS 5.10: patch usr/sbin/svccfg

Install these patches as soon as possible after installation of Solaris 10. Also make sure

of the following notes when applying/removing any patches.

Read README files of the patches before applying them.

Remove patches in the global zone and not in the non-global zone if needing to

remove patches from the system.

Solaris 10

3/05 and

Solaris 10

1/06 only

The following patch is required to use the NFS version 4.

NFS version 4 has limitations.

119828-04 or later SunOS 5.10: nfssrv Patch

Install the above patches.

Solaris 10

3/05 only

For Dynamic Reconfiguration (DR) and PCI Hot Plug, the following patches are

required to be installed.

119254-06 or later SunOS 5.10: Install and Patch Utilities Patch

118822-08 or later SunOS 5.10: kernel Patch

913732-01 or later Enhanced Support Facility 2.5: Dynamic configuration core

command patch

Install the above patches.

Solaris 10

3/05 only

For CPC (CPU Performance Counter) (cpustat(1M), cputrack(1M), libcpc(3LIB)), the

following patches are required to be installed.

119254-06 or later SunOS 5.10: Install and Patch Utilities Patch

118822-08 or later SunOS 5.10: kernel Patch

Install the above patches.

Solaris 10

3/05 only

Содержание PRIMEPOWER 1



















































Результаты поиска

Содержание PRIMEPOWER 1

Отзывы:

Похожие инструкции для PRIMEPOWER 1

Бренды по названию

Популярные бренды

Fujitsu PRIMEPOWER 1, Руководство по аппаратной платформе

Результаты поиска

Содержание PRIMEPOWER 1

Отзывы:

Похожие инструкции для PRIMEPOWER 1

Бренды по названию

Популярные бренды