Fujitsu Plasmavision PDS4208W-B, Руководство по обслуживанию

Страница: 7 / 51

– 6 –
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Signal
15.73 59.94 SDTV 525i
15.63 50.00 SDTV 652i
31.47 59.94 SDTV 480p
45.00 60.00 HDTV 720p
44.96 59.94 HDTV 720p
33.75 60.00 HDTV 1,080i
33.72 59.94 HDTV 1,080i
FACTORY SET SIGNALS (Component video mode)
Pin No. Input signal Pin No. Input signal
1 Red 9
2 Green 10 Ground
3 Blue 11
4 12
5 Ground 13 Horiz. sync
6 Ground 14 Vert. sync
7 Ground 15
8 Ground Outer side Ground
Horizontal
frequency (kHz)
Vertical
frequency (Hz)
Signal
15.73 59.94 NTSC
15.63 50.00 PAL
15.63 50.00 SECAM
15.73 59.97 4.43 NTSC
FACTORY SET SIGNALS (Video, S-video mode)
• The dedicated graphics card is optional.
• In the 800 x 600 and 1,024 x 768 modes, images of reduced size are displayed on the screen, using size reduction and
interpolation. Also note that on-screen information is also displayed in reduced size.
• “ Out of range” appears if the display receives a signal whose characteristic does not fall within the display's
permissible range.
• You can check the input signals with “Status” on the OTHERS Menu screen.
∗
The sync switch (TTL/ANALOG switch) is on
the rear of the 13-pin horizontal sync and
14-pin vertical sync terminals.
Pin No.
RGB 1 INPUT TERMINAL
Pin No. No. signal
1 DCD (Data Carrier Detect)
2 RD (Receive Data)
3 TD (Transmit Data)
4 DTR (Data Terminal Ready)
5 GND (Ground)
6 DSR (Data Set Ready)
7 RTS (Request To Send)
8 CTS (Clear To Send)
9 RI (Ring Indication)
RS-232C INPUT TERMINAL