Fujitsu Plasmavision PDS4208W-B, Руководство по обслуживанию

Страница: 6 / 51

SETTING SIGNALS
– 5 –
This display can store parameter settings for eight additional signals for RGB.
To do this, select the desired signal and follow “RGB MODE ADJUSTMENT” in the manual to adjust the parameters.
When you finish, the settings will be automatically stored.
This unit has been factory-set for the 18 signals shown below.
∗
“ Out of range” appears if the dot clock of the input signal exceeds 54MHz (68MHz for XGA) even when the horizontal
and vertical frequencies are within their permissible ranges.
In this case, the sampling clock is fixed at 54MHz (68MHz for XGA).
Make sure that the vertical frequency of the input signal is 75Hz or less for SVGA and 60Hz for XGA.
Display (dots x lines) Horizontal frequency (kHz) Vertical frequency (Hz) Signal
852 x 480 31.72 59.97 When a dedicated
graphics card used
640 x 480 31.47 59.94 VGA
640 x 480 37.86 72.81 VGA 72Hz
640 x 480 37.50 75.00 VGA 75Hz
640 x 480 43.27 85.01 VGA 85Hz
720 x 400 31.47 70.09 VGA 400 lines
640 x 400 37.86 85.08 VGA 400 lines
800 x 600 35.16 56.25 SVGA 56Hz
640 x 400 37.88 60.32 SVGA 60Hz
800 x 600 48.08 72.19 SVGA 72Hz
800 x 600 48.88 75.00 SVGA 75Hz
1,024 x 768 48.36 60.00 XGA 60Hz
640 x 480 35.00 66.67 MAC 13RGB
848 x 480 31.02 60.00
640 x 480 15.73 59.94 60 fields
640 x 480 15.63 50.00 50 fields
640 x 400 24.82 56.42 NEC 24kHz
640 x 400 31.50 70.15 NEC 31kHz
15.63 to 80.00* 50.00 to 120.00* User setting
FACTORY SET SIGNALS (RGB MODE)