E-9
English
SELECTOR SECTION – FRONT
1
Power indicator lamp
This lamp shows the state of the power supply.
Lit (red):
Stand-by
Lit (green):
Power ON
Lit (orange):
Power saving (DPMS: Power saving function) mode ON (See P. E-42.)
Flashing (red): Malfunction (Flashes differently depending on the type of malfunction. See P. E-50 for more information.)
2
Remote control signal receiver
Receives signals from the remote control.
3
POWER button
Turns the power “ON” and “OFF”.
* Even when the power is “OFF”, some parts are still powered.
4
Video3, S-video input terminal *
Connect this terminal to the S-video output terminal of your VCR, etc.
5
Video3, video input terminal *
Connect this terminal to the video output terminal of your VCR, etc.
6
Audio input terminals (L/R)
These are the audio input terminals for the Video3 and RGB3 terminals.
Input the audio for the video to be seen here.
7
RGB3 input terminal
Connect this terminal to your PC’s mD-sub output terminal.
* On selecting the video input format
(See “SETTING THE INPUT TERMINALS” on P. E-41.)
Warning
If the power indicator lamp flashes red, this signifies that the display has developed a problem. When this happens, be sure to remove the
power plug from the receptacle and contact your dealer. Leaving the display power ON can result in fire or electric shock.
e04̲psu4h10w(07̲15)j.p65
02.10.29, 5:03 PM
9
