background image

PagePrinter Network Adapter: Utilities & Environments

G-3

Glossary

IP

See Internet Protocol .

L

LAA

See Locally Administered Address

LAN. 

See local area network.

LAN Connection Utility

An OS/2 utility that resides on a network 

server used to redirect printer or plotter data from its intended destination 
to a printer or plotter on a LAN-attached adapter. 

LAN segment. 

Any portion of a LAN that operates independently of, but 

is connected to, the network by bridges or routers.

local area network (LAN).

 A computer network located within a limited 

geographical area of a few hundred meters. 

Locally Administered Address (LAA). An 

address that a 

network administrator assigns to a network adapter on the 
LAN. Administrators may assign the adapter any address that 
they wish (within certain constraints). Many administrators 
use the LAA to give the adapter a meaningful address in their workplace 
(for example, assigning the adapter an address that identifies its location).

lpd

Line printer daemon. Allows the use of remote printing functions 

under TCP/IP. This software registers the print document sent from a 
computer. It is a background process that runs all the time.

lpd print service

UNIX utility that receives print jobs from remote TCP/

IP hosts.

LPT (Line PrinTer). 

A representation of one of the logical ports (for 

example, LPT1) on a personal computer.

Management Information Base (MIB)

A database used to manage a 

network and the machines based on RFC 1213, is an example of MIB. The 
MIB describes information specific to the Network Adapter and the 
printers.

MIB

. See Management Information Base.

Содержание PagePrinter


































































































Отзывы: