Fujitsu P24-9 TE Скачать руководство пользователя

Страница: 38 / 55

Operation

Function

Description

Auto Brightness

Enable/disable automatic control of the brightness

This function is used to automatically control the brightness of the
background lighting using the ambient light sensor.

This setting only appears on models with an ambient light sensor and can
only be enabled in

Photo

Custom

mode.

As soon as

Auto brightness

is enabled,

ACR

is automatically disabled

Lighting Guide

Enable/disable advice on workplace lighting

With this function, advice is displayed if the ambient light at the workplace
does not meet the ergonomic recommendations for working at the computer
screen.

This setting only appears on models with a light sensor.

Auto level

Adjust the signal level

With this function you can automatically set the contrast.

Press the

button to run the function.

This setting only appears with an analogue video signal (e.g. VGA).

Locking the OSD menu

The OSD menu can be locked to prevent accidental or unauthorised changes to the monitor settings.

►

Press the

button and the ON/OFF button at the same time and keep

them pressed for approximately 10 seconds.



The message

OSD locked / unlocked

is displayed.

Please proceed in the same manner to release the locked OSD menu again.

Lock the ON/OFF button

The ON/OFF button can be locked to prevent accidental or unauthorised
changes to the monitor settings.

►

Press the buttons

and

at the same time and keep them pressed for a few seconds.



The message

Power button locked / unlocked

is displayed.

To remove the locking of the ON/OFF button again, proceed in the same way.

Fujitsu

Содержание P24-9 TE
























































Результаты поиска

Содержание P24-9 TE

Отзывы:

Похожие инструкции для P24-9 TE

Бренды по названию

Популярные бренды

Fujitsu P24-9 TE, Руководство по эксплуатации

Результаты поиска

Содержание P24-9 TE

Отзывы:

Похожие инструкции для P24-9 TE

Бренды по названию

Популярные бренды