8
Use operational issues
Q1: How do you get the router to start setting
If you have more than one router, please select one as the master router, plug in the power and
network cable to the WAN port, and then download the MESSHU Router APP. After you finish
configuring the host router,you can add other slaves router to the same mesh network.
Slave router only need to connect power (do not need to connect network cable)
When setting for the first time, place all RT500 (including Master & Slave) within 3m from the
mobile phone. After setting the pairings, place the RT500 in a place where you need to, and place
the distance away from other routers. Within 10m, and it is recommended to restart all RT500
( slave) after place, wait about 10 minutes, wait for the system to start and optimize the
network
(Download MESSHU APP to set up Mesh Router, Search for "Fujitsu MESSHU Router" on APP
store or Google Play.)
Open the APP, select the "Wizard" at the bottom and set it according to the APP instructions
For more details, please refer to the last
Supplemental instruction: MESSHU Router Setting Procedure
Содержание MESSHU RT500
Страница 28: ...28 11 Please select your country and click next 12 Wait for the Router to detect network settings ...
Страница 37: ...37 24 Wait for the APP to find the Router 25 Select the Router you want to install and click Next ...
Страница 38: ...38 26 Start setting 27 The setting is complete ...
Страница 41: ...41 32 To add delete modify Router again please set in Device ...